Does your HP printer encountered, “HP Printer AirPrint Connection Fails on (iOS)? Or You are facing a troluble in setting Airprint connection with your HP Printer on iOS, then, here we are to provide you a complete trouble shooting guide, on this problem.
HP Printer AirPrint Connection Fails (iOS). The term AirPrinting is basically a mobile printing solution that is introduced by Apple and is unable to print wirelessly on iOS devices. Also, you don’t need to install any additional printer driver or software on your iOS device to access the Airprint feature. You also need to make sure that you connect your HP printer and your iOS device to the same wireless network.
For this, you don’t need to use a wire or cable for connecting your printer to the computer. If you want to know how you can set up HP Printer AirPrint Connection Fails then follow the steps carefully and implement it in the same way as it has been defined.
1: If you want to know how to setup HP Printer AirPrint Connection Fails, then you need to ensure that your HP printer is compatible with the Airprint feature.
2: It has been finding that most of the MacOS are compatible with Apple Airprint feature.
3: Now, you need to plug one end of the power cord to the HP printer and the other end will be directly connected to the wall outlet.
4: Now, press the power button to switch on your printer.
5: Next, you need to wait for the printer to complete the warm-up process and then settle down.
5: Disconnect the USB cable from the printer i.e connecting to your computer.
6: Now, tap on the wireless icon on Printer’s control panel and connect the printer to the wireless network.
7: Connect both your Mac or iOS device to the same network.
8: Try to make sure that you won’t connect your printer to a different wireless network.
Typically, you will see this error if both your printer and computer device are on different wireless networks and this is a first basic thing to check that whether both printer and the Apple device are working on the same wireless network.
It is also possible that there might be some other reasons. So, to address this problem you need to follow the below-given steps:
Try these steps first for fixing this error:
1: First, you need to move the router closer to your printer and check for interference.
2: Now, you need to check whether your printer has its wireless connection and is switched on.
3: Ensure that your iOS device is not in Airplane mode.
4: Try to make sure that all the devices are running on the same network.
5: Now, you need to check both the iPhone and printer is running the latest software.
6: Next, you need to turn both the devices off for at least 10 seconds and then turn it on again.
If none of the steps work then you can try some more following-given steps
How to enable Air-print Printers?
As such, there are three primary ways to set up your printer up to work by using Airprint:
1: Firstly, you need to connect your printer to an Active Mac.
2: Now, connect your printer to a router.
3: Purchase a printer with built-in support for Airprint.
Some of the Basic Checks for HP printer Airprint issues:
Once you start proceeding with any of the fixes, you need to check the following conditions:
1: Try to make sure that your printer is connected to the same Wi-Fi network as your iPhone or iPad is.
2: Ensure that your HP Printer has toner installed or if it contains enough ink in it.
3: Make sure that your printer is turned on. It happens sometimes that some of the printers might take several minutes before it can print.
4: Ensure that both your printer as well as device falls within the same range.
5: Make sure that your iPhone is using the latest version of iOS, macOS
6: For iOS, iPadOS: You need to go to settings>General>Software update and for macOS: go to System Prefernces>Software update. However, if you are using an earlier version of the macOS software, then you will need to open the app store on your Mac to update.
7: Check with your printer manufacturers to see if you have any firmware updates are available and if there is then you need to update your printer first.
8: Check with your router’s vendor to see for the updates and if there is then you need to update the firmware on your router. Most of the routers let you update it with a web-browser.
9: Ensure that your printer has a paper.
10: Try to make sure that your HP Printer supports Airprint. You can also see the list of Airprint devices on Apple’s website. Some printers might have additional settings to turn off or on Airprint.
11: Make sure that Airprint is enabled on your printer and still if it won’t resolve the issue then you can contact the printer manufacturer for additional assistance.
Why does your HP Printer AirPrint Connection Fails with iOS?
Are you seeing the error No Airprint Printers found after updating your iOS or changing to a new different iPhone? If so, then you are not the only one who is facing this trouble as everyone is suffering from this same problem. So here, in this article, we have come up with the best troubleshooting methods of how to fix this error.
Refer the following steps that why HP printer Airprint connection fails with iOS:
1: Firstly, you need to check the settings of your Apple mobile device.
2: Now, confirm is your Printing machine is connected to the internet properly.
3: Next, you need to confirm both the settings and connection of your wireless access point router.
Follow these steps to get Airprint working on your iPhone today:
1: First, you need to check that if your HP printer is supporting Airprint via the manufacturer’s info.
2: Now, you can make use of Wi-Fi setup on your printer and then give a try to Wi-Fi wizard if available.
3: Next, you need to re-enter the password for your Wi-Fi network before initiating any wizard or set-up assistance.
4: Make sure that you have enabled the Bonjour setting on the printer and if the setting is disabled then it might be possible that you cannot print via Apple Airprint.
5: Now, verify that your router support Bonjour packets.
6: You need to ensure that your computer device and the printer are connected properly to the same Wi-Fi network.
7: Now, tap off Wi-Fi in the control centre and then you need to wait for 10 seconds and then tap it back on.
8: Next, you need to switch your iDevice Wi-Fi bandwidth setting from 2.4GHz to 5 GHz.
9: Turn off your Airplane mode and then turn on your Bluetooth.
10: Now, update your DNS settings to 22.214.171.124 and 126.96.36.199 or other public DNS.
11: If enable then you need to disable Firewall while printing.
12: Finally, you can install your manufacturers printing app and then try printing.
How to Fix HP Printer AirPrint Connection Fails with iOS?
Apple iOS and macOS devices contain the latest technology and help in creating a full-quality print out of the page and without installing or downloading any third party-drivers. As such, many specialized printers usually contain their Print apps to drive the ecosystem.
The HP Printer AirPrint Connection Fails and got an error in unable to print. Now, what should you do? Well, look at the following given-steps for dealing with this type of error.
Before you start doing the following steps you should be waiting for a moment before you try to print and turning on your Airprint printer. As many printers usually take a couple of minutes after powering up and joining your internet connection.
Solution 1- Restart Your Printer:
Here has been listed some steps that show how you can restart your computer:
1: First, you need to move the router, closer to the printer and then check for the interference.
2: Now, a check is your printer has its wireless connection switched on.
3: You need to ensure that is your iOS device is not in the Airplane mode.
4: Ensure all your devices are working on the same wireless network.
5: Now, check that both your iPhone and printer is running with the latest software.
Solution 2- Update Your Printer Firmware:
HP always tries to releases new printer firmware versions along with the product enhancements or fixing issues. Depending on your printer, apps on the printer control panel might also receive updates.
While updating firmware and apps on the regular basis you need to make sure that you are getting the most out of your printer. You can use one of the following methods to upgrade the firmware. However, if one method doesn’t work well then you need to try the other methods:
1: First, you need to turn off the printer.
2: Now, disconnect the power cable from the printer up to 30 seconds and then again try to reconnect it.
3: Turn the printer on while you press and hold the Resume button for at least 10-20 seconds and see if the attention light turns on or not.
4: Finally, you can release the resume button.
Solution 3- Disable IPV6 on Your Printer:
Refer the following steps of how you can disable IPV6 on your printer:
1: From the home screen on the printer control panel, first you need to touch the wireless icon.
2: Now, touch the settings icon and then touch advanced settings and see if IPV6 is set to off. Mainly the printer may be already using IPv4 so you need to skip the next step.
3: Now, try printing from Airprint.
Solution 4- Update the latest iOS Version:
If a message starts appearing on your computer device and displays an update is available then tap to install now. You can also follow the given steps for updating the latest iOS version.
1: First and foremost you need to plug your device into the power cord and then connect to the internet with Wi-Fi.
2: Now, go to settings>General and then tap Software update.
3: Next, you need to tap download and install and if a message asks to temporarily remove the apps because the software needs some space for the update, and then tap continue or cancel. Later on, iOS will reinstall apps that are removed.
4: To update now, you need to tap install, or you can tap later and then choose to install today or remind me later. If you choose tap install today then you need to plug your device into power cable before you fall asleep. Thus, your device will start getting updated automatically.
5: If they asked you enter your passcode then you need to enter it.
Solution 5 – Turn Off Internet Printing Protocol over HTTP’s:
When you have turned off all web-services then your printer remains no longer to communicate over the internet with HP server to access connected printing services. So, turning off web-services is surely recommended.
Here has been listed some points that shows how you can turn off Internet printing protocol over HTTP’s
1: First, you need to configure the policy value for your computer configuration>>Administrative Templates>>System>>Internet Communication Management>>Internet Communication Settings>>Turn off printing over HTTP to Disabled.
Solution 6 – Use a Different Printing Method:
If you see that the printer connection gets fails over the local wireless network, then you need to continue with the following-given steps of how to set up Wi-Fi direct printer connection to your Apple device.
1: On your HP printer, you first need to touch the Wi-Fi Direct/HP wireless direct icon to confirm that the feature is on.
2: On your Apple device, you need to tap settings and then tap Wi-Fi.
3: Under Choose a Network, you need to select your printer with DIRECT in the name.
4: If prompted for a password, you need to type 12345678 as this is the default password to log in.
5: Now, try to print.
6: Reconnect to your local Wi-Fi network once the print job gets completed.
Solution 7 – Restart your iPhone or iPad:
For restarting your iPhone or iPad, you need to learn the following given steps:
1: First, you need to press and hold the volume button and the side button until the power off slider appears on your screen.
2: Now, drag the slider, and then wait for at least 30 seconds for your device until it turns off.
3: To turn your device on, you need to press and hold the side button together on the right side of your iPhone until you see the Apple Logo.
Solution 8 –Reconnect your iPhone or IPad:
If you want to keep the data on your iPhone in sync, then you need to use Apple iCloud so that it keeps all your devices in sync at all times. As long as both your devices are connected to the internet and have the same iCloud settings then you can easily access then by using the same Apple ID and they will stay in Sync.
If you have forgotten your Wi-Fi network and trying to reconnect it then this step is quite helpful when you are having Wi-fi problems and here is how to fix it:
Here is how to reconnect your iPhone or IPad:
1: First you need to tap Settings.
2: Now, tap Wi-Fi.
3: Next, you need to tap the icon located next to your Wi-Fi network if you want your iPhone or iPad to forget. Here you will also see the blue icon on the left.
4: Now, tap forget this network and here a popup will appear and saying Forget Wi-Fi network mac reports? Your device and other devices that are using iCloud will be no longer to join this network. So, you need to tap the red Forget button.
5: Next, you need to reconnect it again and then go to settings>Wi-Fi and then tap the name of the network and enter the password to connect.
Some more steps to re-connect both your iPhone and IPad:
1: First you need to open the Settings app on your device and tap your name to open the Apple ID screen and then you need to select iCloud.
2: You need to turn on the toggle switches, next to every category of app that you want to sync in between the iPhone and iPad. You need to repeat this process with the second device too.
3: Now, go to Settings>Passwords & Accounts and ensure that all your e-mail accounts are set up the same on both device.
4: Next, you need to go again Settings>iTunes and App Store and then turn on automatic downloads. You can update both the devices by moving the toggle switches next to them on green position.
5: Once you have set up iCloud on both devices, then they will usually remain synched. Moreover, this approach keeps the entire majority of your information identical across both the devices. Here the iCloud is accessible on iOS, macOS and Windows devices. It also, keeps your data secure when it is in storage and when it gets transited.
Solution 9 –Reset the Printing System:
While resetting the printing system removes all your printers and scanners from the printers queue and it also clears your entire print jobs and print settings from the system. It mainly includes printers and scanners that are not form of HP.
Resetting the printing system can be useful for troubleshooting all the printing problems. But you also need to add printers and Scanners back to the list once you get finished. When resetting the printing system might resolves the following certain issues too:
1: Print jobs that usually get stuck in the queue.
2: An incomplete print driver installation.
3: Communication issues between the printer and the Mac.
Some more steps for resetting the printing system:
1: First, you need to click on the Apple menu and then click System Preferences.
2: Click Printer and Scanners, print and scan or print and fax.
3: Now, right-click anywhere inside the printer window and then click Reset printing system.
4: Next, click Reset and then press OK.
5: If prompted, then you need to type your username and password and then click Ok.
6: Here the printing system gets reset.
7: Now turn off the printer and wait for at least 5 seconds and then again turn on your printer.
8: Wait until the printer becomes idle and silent.
9: In the Printers main window on the Mac, you need to click the Add button.
10: Now, select your printer from the list and then click Add. It might take some time before your printer displays in the printer list.
Frequently Asked Questions (FAQ’s)
Q1: How you can troubleshoot Airprint?
Ans: Follow the given steps to troubleshoot Airprint by these methods:
1: Firstly, you need to make sure that the printer contains the latest Firmware version installed in it.
2: Now, you need to power off and then on the iOS device.
3: Next, you need to turn off the Bluetooth on the iOS device.
4: Now, tap the settings icon.
5: Finally, you can try to print from Apple print.
Q2: How to get the iPhone to recognize to my printer?
Ans: Here has been listed some steps that helps in recognizing your iPhone to the printer:
1: First, you need to open the app that you want to print from.
2: Now, to find the print option you need to tap the share icon.
3: Next, scroll down and then tap or print.
4: Now, you need to select Printer and then choose an Airprint- enabled printer.
5: Choose the number of copies of pages that you would like to print.
6: Finally, you can tap on Printer in the upper-right corner.
Q3: How to fix Printer offline problem?
Ans: Perform the following steps for fixing the printer offline problem:
1: Firstly, you need to check and make sure that your printer is turned on and is connected to the same network as your device.
2: Now, run a printer power cycle.
3: Next, you need to set your printer as the default printer.
4: Clear the print queue.
5: Now, reset the service that helps you in managing the printing queue.
6: You need to remove and re-add your printer to your device.
7: Finally, you can restart your PC.
Q4: How you can reset your HP printer?
Ans: 1: From the screen on your printer, you need to navigate to setup.
2: Now, tap tools.
3: Tap Restore defaults.
4: Now, tap yes.
5: Here you will see that the printer gets restarted.
6: Once it gets restated then your printer will have been reset to factory default settings.
Q5: How you can restart Print spooler?
Ans: For restarting the print spooler service try the following given steps:
1: First you need to tap on the Settings icon on your Android device and then select apps from the application button.
2: Now, select and Show system apps in this section.
3: Next, you need to scroll down this section and then select Printer spooler service.
4: Press both clear cache and clear data.
5: Finally, you can open the document or image that you want to print.
Final Words: If you are been suffering from the HP Printer AirPrint Connection Fails then you might follow all the above-given troubleshooting steps and resolve this error. If you are still finding the errors then you can contact our expert technicians via chat we will surely help you in dealing with this problem by delivering only the right solutions for it.
We have covered a team of highly professional experts and who are always ready to provide your fruitful techniques to any HP printer related problem. They will also direct you with the entire possible troubleshooting steps within a simple and easy ways.