HP Printer Displaying Error 0XD8077900

The Error 0XD8077900 is a very basic problem you might face while printing from an HP Printer. This problem is essentially related to issues with cable connection between your HP Printer and the computer or some hardware issue in the Printer and the system. This article will tell you how to fix the HP Printer Displaying Error 0XD8077900 issue.

Why does your HP Printer Display Error 0XD8077900?

Let us know what the potential reasons that cause the HP Printer Display Error 0XD8077900 issue are:

1. Protocol conflict caused by IPv6.

2. A new HP firmware glitch.

3. The HP outdated Printer firmware.

4. You have hardware issues with your computer or the Printer.

How to Fix HP Printer Displaying Error 0XD8077900?

Since we’ve now been able to understand what could be causing the HP Printer Displaying Error 0XD8077900 issue, we will now know how we can solve this problem. Below in this article, we have provided three easy solutions to fix this problem. Keep scrolling.

Solution 1: Reset your HP Printer

To reset your HP Printer, follow these steps:

1. Turn on your Printer.

turn on printer to Fix HP Printer Displaying Error 0XD8077900

2. You need to ensure that no activity is happening in your Printer. After checking that, you need to disconnect the power code from your HP Printer. You also need to remove it from the wall outlet.

3. Wait for a minute or two and then reconnect the power code and start your Printer.


4. Once your Printer is ready to be used, initiate a test print and check whether your issue has been solved or not.

Solution 2: Disable IPv6

To disable IPv6, you need to follow these steps:

1. Open the Run dialogue box by pressing the Windows + R key.

2. Now, type ncpa.cpl in the Run search box and tap the enter button.

ncpa to Fix HP Printer Displaying Error 0XD8077900

3. Open the Network Connections tab.

4. Right-click the currently active network and select Properties.

5. Under the Connections Uses the following Items heading, uncheck the Internet Protocol Version 6 (TCP/IPv6) option.

6. Click okay and save the changes.

Internet Protocol Version properties

7. Restart your system, and check whether the problem still persists.

Solution 3: Update HP Printer Firmware

You can update your HP Printer Firmware in the following three ways:

1. through the HP Smart App

2. Directly from the Printer

3. From HP’s website

Here, we have discussed how you can update the firmware directly from the Printer and HP’s website:

1. You need to ensure that the Printer is connected to the internet using a wireless or Ethernet connection.

2. Press the HP ePrint button on the Printer. Next, select Settings or Setup, then select the option to update the firmware.

Note: If there’s no HP ePrint icon on your Printer, you can open the Setup, then Service, then Preferences, then Printer Maintenance, and then finally select Web Services, Printer Update, or LaserJet Update.

3. If asked, sign up or accept the terms of Service.

4. Follow the directions to enable Web Services and set up automatic updates.


1. Ensure proper connectivity of the Printer and computer.

2. Go to HP Software and Driver Downloads tab and enter your Printer model.

enter hp printer model no to search drivers to Fix HP Printer Displaying Error 0XD8077900

3. Tap on Firmware from the list of drivers.

4. Click Download next to the update option, and proceed to the instructions.

select od and download driver to Fix HP Printer Displaying Error 0XD8077900

Frequently Asked Question

Q1. Why am I receiving an error message on my HP printer?

Answer: This problem could be occurring due to a hardware problem or a cable connectivity issue between the computer and your Printer. You can fix this problem by resetting the Printer or updating your Printer’s firmware.

Q2. Why is my Printer connected but not able to print?

Answer: This issue could probably be arising due to your USB cable not being appropriately plugged into your Printer or a connectivity issue with the Wi-Fi. You can also check the link in your toner cartridges.

Q3. How should I reset my HP Printer to factory settings?

Answer: To restore your HP Printer to the factory-default settings, follow the given steps.

1. Switch off your Printer. Wait for 30 seconds and turn it on.

2. Switch on the Printer by holding and resuming the Printer for few seconds.

3. Leave the Resume button.

Q4. Why has my HP printer suddenly stopped working?

Answer: This issue could have occurred due to instability in your power connection. To solve this issue, you can try restarting your Printer.

Q5. Why has my Printer stopped working wirelessly?

Answer: This issue could be a result of a problem with your wireless router. Check your wireless connection to solve this problem.


We hope, that now with the help of the solutions and methods discussed above, you will be able to fix the issue of the HP Printer Displaying Error 0XD8077900 with ease. However, if you are still not able to solve this issue, you can connect with us via the chatbox or the comment section below.

Leave a Reply

Your email address will not be published. Required fields are marked *