The issue where your screen goes black with just the cursor on it is known as KSOD or black screen of death. This issue can be found in Windows versions 7, 8, and 10. The black screen or KSOD occurs when the screen goes black or blank. This article will tell you the reasons and solutions of the black screen with cursor on Windows 7, 8, and 10 issues.
What causes Black Screen with Cursor on Windows 7, 8, and 10?
1. The black screen or KSOD occurs when the screen goes black or blank. When the Operating system cannot load the shell because it is corrupted, damaged, or changed permissions, this problem occurs.
2. Another reason for the KSOD could be a corrupted VGA driver or a corrupted boot environment. Being a software issue, the VGA driver problem can be fixed with little troubleshooting.
How to Fix Black Screen with Cursor on Windows 7, 8 and 10?
Follow the solutions provided below accurately to fix the black screen with cursor on Windows 7, 8, and 10 issues:
Solution 1: Perform System File Checker to Fix Black Screen with Cursor on Windows 7, 8 and 10:
Run an SFC Scan as it works as a Windows issue detector to fix the black screen of death on Windows 7, 8, and 10:
1. Firstly, open the Run box by pressing the Win+ R keys together.
2. Now, type cmd in the Run search box, and then press the Ctrl+ shift+ Enter key together to open the Command Prompt as the administrator.
3. In the Command Prompt Windows, type sfc or scannow and hit Enter.
4. The SFC scan will now start. Wait till it is over, and then close the Command Prompt.
5. You can now restart your device to check if the devices and Printer not loading issue has been resolved.
Solution 2: Remove Display Driver to Fix Black Screen with Cursor on Windows 7, 8 and 10:
You can remove the display driver in order to fix KSOD on Windows 7, 8, and 10 using the following steps:
1. Press the Windows and R keys to open the Run dialogue box and type the following:
2. Hit Enter and from the dialogue box that appears, expand Display Adapters.
3. Next, right-click the Display Adapters and select Uninstall.
4. After uninstalling the Display Adapters, reboot the PC back into normal mode and re-download the latest drivers.
Solution 3: Restore Registry
To restore the registry, follow the given steps:
1. Firstly, reboot your system and start hitting F8 and F12 repeatedly.
2. When the Windows Safe Boot Screen appears, choose the topmost command to Startup Repair your windows.
3. Now, tap Enter, and then for Login, hit Enter the same password if applicable.
4. Next, click down the Command Prompt option. After this, a window showing the Administrative Rights assigned to it will open.
5. The letter X:\ on the drive you are on.
6. Now, we need to get to your real copy of Windows. You can do this by opening the Command Prompt and typing the following, and hit Enter.
Note: Here, you should see C:\ as such, and you are on your C: drive.
7. Type the following and hit enter.
8. You will now be on the root directory to see all of your folders, and here you need to type the following and hit Enter.
9. From the list of directories that open, search for the Windows directory. The <dir> is the correct Windows directory.
10. Now, type the following and hit enter.
11. Next, type:
12. To look for the RegBack directory, type the following and hit Enter.
13. Type dir, and the DEFAULT SAM SECURITY SOFTWARE SYSTEM files will appear.
Note: If the dates listed next to them are within the past few days or weeks, this is where you want to be.
Now, in order to fix the issue type the following:
xcopy cd C:\Windows\System32\config\RegBack C:\Windows\System32\config
14. When the prompt asks you, select A for All.
Note: You will get a reply stating that all five files were copied. You can then type exit and hit enter, and it will bring you out of the Command Prompt.
Solution 4: Perform System Restore
1. Type system restore in the Start Menu‘s search.
2. Then, Enter and open the run dialogue and type the following:
3. Click OK and then select the System Restore option from the search.
4. Then, check box the Show More Restore Points option and click Next.
5. After this, you need to select a restore point by looking at the dates when your computer was working fine.
6. Lastly, click Next and then Finish.
Using these steps will start the system restore, and the computer will reboot after the reboot completion.
Frequently Asked Question
Q1. What to do if the computer does not boot up after turning it on?
Answer: If your computer is not booting up after being turned on, you can follow the given troubleshooting options:
1. Check your Monitor for any connectivity or hardware issues.
2. Unplug any unnecessary USB devices that could be causing this problem.
3. Reseat the Hardware inside your device to check for any other problems.
4. Check the BIOS carefully.
5. Try scanning for Viruses.
6. Try running a boot Into Safe Mode.
Q2. What is the cause of a PC not booting up?
Answer: This problem could be arising due to the following reasons:
1. You have a poor electrical connection.
2. There is a power supply failure.
3. You are facing an operating system failure.
Q3. How to fix a boot failure in Windows 8?
Answer: To fix a boot failure in Windows 8, you can change the BIOS boot order by changing the hard disk position.
We hope you will now be able to solve the KSOD in Windows 7, 8, and 10. However, if you are still not able to solve the problem, then you can connect with us via the chat box at the bottom right or through the comment section below. We’ll try to help you solve the issues with Windows.