Usually, few things are more frustrating than using the internet and thus it runs into page-loading errors. Sometimes the internet connection issues can lead you towards productivity losses and thus make it difficult to work. Most of the connectivity problems are related to DNS issues on Windows 10. So, here in this article, we have defined the most common causes along with the instructions for fixing this error.

Why Do You Keep Having DNS Issues on Windows 10?

The DNS error gets usually caused by problems on the user end. Here are some of the reasons for DNS issues on Windows 10 and these are:

1: Sometimes the network and internet connection got some errors.

2: Misconfigured DNS settings.

3: Using an Outdated browser and a lot more.

All these above reasons can attribute to a temporary server outrage that reduces the DNS available.

How to Fix DNS Issues on Windows 10?

If DNS doesn’t work properly then it is obvious that won’t be able to use the web-connected services like browser, e-mails, etc. Also, the web page may time out and thus gives you an error message and even bring up a specific DNS error message.

So, in this post, we will explain the best troubleshooting steps that help in resolving this problem. Just, walk through our given several connections and how you can fix DNS issues on Windows 10.

Have a look!!!

Solution 1 – Start Computer in a Safe Mode to fix DNS Issues on Windows 10:

However, if your operating system is not functioning properly then it might result in the DNS server not responding error message. Thus, you might need to boot your windows device in safe mode to see if this would help in resolving the issue. By doing it, will limit the resources that are running for windows and this can be an effective way to troubleshoot the problems.

1: In order to start your Windows 10 in safe mode, you first need to select the Windows button and then click on the Power icon.

2: Now, hold down the Shift key and then click Restart.

3: Here in the Window that appears, you need to click on troubleshoot>Advanced, and under the Advanced option you need to select Start-up settings, followed by Restart.

4: Now, more options will appear and you need to press 4 or 5 to enable Safe mode.

5: Finally, your computer will then restart in Safe mode.

However, if you are using Windows 7 then you can restart it in safe mode by going to Power>Restart and when it is booting up then you need to hold down the F8 key.

Solution 2 – Disable all Secondary Connections to fix DNS Issues on Windows 10:

Sometimes disabling your antivirus software didn’t work well. So, the potential solution is to disable the secondary connections i.e available on your computer and you need to make sure that only the connection that you are using should be currently active.

Follow these given steps:

1: In Windows, you need to type Network connections into the search box of your desktop taskbar.

2: Now, click on View Network Connections.

3: Here it will bring you to the Network connection page and any connection that you are not using will have a red (X) right next to them.

4: Right-click on one and then select Disable.

5: You can repeat this for any other connections that are currently active and once you are done then restart your browser and try to visit the website again.

Solution 3 – Reset your Router to fix DNS Issues on Windows 10:

The next step that you can perform is to restart your router and doing so will flush your router cache and this could be the solution for resolving the DNS server not responding message.

Various modems come along with a power button and enable you to quickly power them off. After some time, you can turn your modem back on and then wait to re-establish a connection. Once it gets completed then you can access the internet from your browser.

You should also need to remember that sometimes restarting the router is not enough. Thus, you need to reboot it and then unplug it entirely and then wait for at least 20 seconds before plugging it back in and powering it on again.

Solution 4 – Uninstall and Reinstall your Network Drivers:

To reinstall your Network drivers, try these following steps:

1: First, press Windows Key +X and then select Device Manager from the list of results.

2: Now, locate your network adapter and then right-click it, and then choose Uninstall.

3: Once you uninstall it then click the Scan for hardware changes button.

4: Locate your network adapter once again and then right-click it and then choose Update Driver software.

5: Now, choose the option to Search automatically for updated driver software.

6: Next, wait for Windows 10 and then download and install the necessary software on your computer device.

7: It is also recommended that you can use third-party software and install the necessary software on your device.

Solution 5 – Clear DNS Cache:

Here has been listed some steps to clear DNS cache:

1: Click the Start button.

2: Now, open Command Prompt.

3: Next, enter the cmd in the search text box. Also, right-click the Command prompt and then select Run as Administrator.

4: Run the following command: ipconfig/flushdns

Solution 6 – Update Network Drivers:

Here has been listed some steps to update your Network card driver:

1: First, you need to press and hold the Windows key and then press R and this will open the Run application.

2: Now, you need to type devmgmt.msc and then hit OK to open the Device Manager.

3: Next, expand the Network adapters section by clicking on the arrow icon.

4: Right-click on your driver and then select Update Driver.

5: Click on Search automatically for updated driver software.

6: Here the Windows will start finding an updated driver and it will automatically download and install the update to your computer.

7: Restart your PC and test if the issue has been resolved or not.

Solution 7– Perform Clean Boot:

Whenever you start Windows by using a normal start-up operation, then there are several applications, services that run in the background. Thus, these programs include the basic system process, antivirus software, and system utility applications. Sometimes these applications can become the reason for software conflicts. Thus, a clean boot should be performed to fix this error in Windows 10. Also, it helps in eliminating the software conflicts that occur when you install a program or an update.

Follow these below-given steps:

1: In the system configuration window, you need to click on the Services tab and then mark the Hide all Microsoft services and then click on Disable all.

2: Now, click the Start-up tab and then click Open Task Manager.

3: Next, under the Task Manager you need to select the application and then click Disable.

4: Disable all applications one by one.

5: Once the programs get disabled then close Task Manager and then click Ok in the system configuration Start-up tab.

6: Now, restart the computer and check if the DNS problem still exists or not, and if not then continue moving with the next step.

Solution 8– Reset Winsock:

Sometimes the Windows sockets help in managing the connection requests and also defines the standard interface to access all the network services and especially TCP/IP.

1: In order to reset Winsock, you need to go to the Command Prompt and then type “netsh Winsock reset”

2: The next thing that you need to do is to wait for a confirmation message and then close the Command Prompt and then restart the PC.

Solution 9 – Disable Peer-to-Peer Feature on your Windows Update:

While using Windows, you need to disable your firewall and other secondary connections that have not to resolve the DNS server issue. But you can try the peer-to-peer feature in order to fix the issue and remember that you only get this feature in Windows 10.

Refer to the following given steps:

1: First, click on the Windows icon, followed by the settings>Update and Security.

2: Here in this window along with the left-hand side you need to select Delivery optimization.

3: Now, “Allow downloads from other PCs” and then toggle the switch to disable it.

4: Once you are done with it then you need to restart your computer and try accessing some website again and still if it doesn’t work then see the next step.

Solution 10 – Change your Power Option Setting to DNS Error:

Here has been listed some points to change your power option set to DNS error:

1: First, you need to press Windows key + S and then enter the power options.

2: Now, select the Power option from the menu.

3: Next, you need to locate the power plan and then click Change plan settings.

4: Here you need to click on Change advanced power settings.

5: Now, locate the wireless adapter settings and then set them to Maximum performance.

6: Click Apply and then OK to save changes.

Solution 11 – Enable Microsoft LLDP Protocol Driver:

Learn these following steps:

1: First, press Windows key + X and then choose Network Connections.

2: Here the network connection window will appear.

3: Now, locate your network connection and then right-click it and choose Properties.

4: Next, locate the Microsoft LLDP protocol driver and make sure that it is enabled.

5: Now, click the OK button to save the changes.

Solution 12 – Use Google’s Public DNS Server:

Follow these steps in order to use Google public DNS server:

1: First, open Network Connections and then locate your connection.

2: Now, right-click it and then choose Properties.

3: Here when the properties windows get open then you need to select Internet Protocol version 4 and then open Properties.

4: Now, select and use the following DNS server addresses and set 8.8.8.8 as the preferred DNS server and 8.8.4.4 as an alternate DNS server.

5: Click ok once you are done.

Solution 13 – Change the Mac Address of your Network Adapter:

Perform these steps to change the Mac address of your network adapter:

1: Open Command Prompt as Administrator.

2: Now, enter ipconfig/all and then press Enter.

3: Next, locate the Physical Address value.

4: Open Network connections and then open your network adapter properties.

5: Now, click the configure button.

6: Next, go to the advanced tab and then select Network access.

7: Here you need to check the value option and then enter the MAC address.

8: Remember, do not enter any address.

9: Once you are done click the ok button.

10: Now, restart your PC and check if the issue has been resolved or not.

Frequently Asked Questions (FAQ)

Q1: How you can reset DNS IP settings?

Ans: Following has been defining some steps to reset DNS IP settings:

1: First, open Settings.

2: Now, click General.

3: Next, click Reset and then reset network settings.

Q2: How to clear DNS cache?

Ans: Here has been listed some steps to clear DNS settings:

1: On your keyboard, you need to press Win +X to open the Win X menu.

2: Now, right-click the Command Prompt and then select Run as Administrator.

3: Next, run the following command: ipconfig/flushdns

Q3: How to find DNS settings in Windows 10?

Ans: Learn these following steps in order to find DNS settings in Windows 10:

1: First, go to the Control Panel.

2: Now, click on the Network and Internet.

3: Next, click on Network and sharing center.

4: Go to Change Adapter Settings.

5: Here you will see some network icons.

6: Click on Ipv4 and then select Properties.

Q4: How you can change DNS settings in Windows 10?

Ans: Refer to the following steps to change the DNS settings:

1: First, open Network and Internet settings in the Control panel.

2: Now, select Change Adapter Settings.

3: Next, right-click your Network Adapter and then select Properties.

4: Select Internet Protocol Ipv4 and then Properties.

5: Use the following DNS server address and then type in two DNS addresses.

6: Select Ok when done.

Q5: How to clear the local DNS cache?

Ans: To clear local DNS cache learn these steps:

1: First, select the Start button and then type cmd.

2: Now, right-click Command Prompt and then choose Run as Administrator.

3: Next, type ipconfig/flushdns and then press enter.

Final words

Hopefully, the above-mentioned steps help in fixing the DNS issues on Windows 10. You can follow these methods one by one and see which one works for solving this issue.

However, if these solutions won’t work then you can contact our technical expert team and get help from them. You can communicate with us via chat and we are all time available for getting your queries. So, feel free to contact us, and in case of any query contact our team. We deliver the best possible solutions that help in fixing this problem.