windows detected hard drive problems

Have you ever met with the issue that suddenly your computer pop-ups a error message and warns you that Windows is detecting a hard drive problems?

Well, it seems that a hard disk error problem is no longer remains a new question. This problem has been bothering almost all windows users for a quite long time.

Even the Windows 10 users have also detected hard disk problem issues in the PCs. So how to fix or deal with such type of issue let us find the reasons and cause for it that why hard disk problem occurs.

Reasons for Windows Detected Hard Drive Problems

Windows detected a hard disk problem. This is the most common error irrespective of running Windows 7, 9, 10, and XP. If windows detected the hard disk problem on your computer device then don’t worry. You can easily fix it. In this article, you will learn how to fix the error and also how to get rid of it.

This page includes all the cases and their solutions in a step-by-step manner. However, you should be aware of the fact that your hard drive starts falling if this issue has been present in your device.

In most cases, the system may be got corrupted or un-bootable and thus you may lose to access your data like photos, videos, music, etc. Read how you can find its best solutions to get rid of Windows detected hard disk error.

What causes the hard drive problems?

The Windows detected hard disk problem error appears in your computer? What can be done in this case? How to fix the hard disk problem in Windows 7/8/10? Just readout and follow the steps to fix the hard disk error without losing the data.

Some of the reasons that cause hard drive problems:

1: Hard drive/ disk failure.

2: System errors like registry errors etc.

3: Logical/ mechanical error.

4: File system corruption damaged.

5: Bad sectors occur on a hard disk partition.

6: Virus attack.

7: False operation or human error.

8: System file gets corrupt.

9: The system freezes frequently.

10: Hard disk drives encounter data loss.

11: The PC turns into the unbootable state or stops responding.

12: System runs into trouble like Blue screen death.

If the above-mentioned issues start happening to your hard drive on PC then windows would detect the problem and remind you of the error message that-Windows detected the hard disk problem.

Solutions for solving hard drive problems:

Solution 1st: Run Disk error and checking utility or CHKDSK:

The error-checking tools check and repair the hard disk problems in Windows 10, 8.1, 8, and 7. Follow the below-mentioned steps to see how it works:

Step 1: Firstly close all the applications.

Step 2: Now open the file explorer by pressing the Windows + E command altogether.

Step 3: Right-click the affected drive and open Properties.

Step 4: In the Properties windows, click the tools and then click on the Check option i.e listed under the Error-checking column.

Check option

Step 5: Now click the scan drive option.

click the scan drive option

Alternatively, you can run CHKDSK scan through Command Prompt by typing:

(chkdsk/f/r X): where X is the drive letter. Once it is successfully got completed, the user can restart the system. Most probably, this fixes all the detected problems with the hard drive.

Solution 2nd: Use System File checker:

The system file checker is a Windows Inbuilt command-line tool for checking the system file integrity. Here are been defined the following steps of how to use it:

Step 1: First and foremost go to the Start Button.

Step 2: In the search bar box, type command.

Step 3: Now right-click and choose the “Run as Administrator” Option.

command prompt run as administrator

Step 4: Under the command prompt, enter /scannow.

Enter command sfcscannow

Step 5: Now press Enter.

This solution is quick as well as efficient. With the help of SFC scan, it rectifies the system file integrity problems. Moreover, it also scans all the protected system files and replaces and found the corrupt or damaged system file along with a backup copy from the cache.

Quick Tip:  In some cases, if you wouldn’t find the replaceable file copy in the cache, then the system will ask for a windows installer or repair the media to access the unavailable system files.

Solution 3rd: Examine your disk well:

If some errors occur to your hard disk, then it would because the Windows detected hard disk problems. In this case, you need to follow the steps below and check your hard disk:

Step 1: Press the Windows logo key and E together to open Windows file explorer.

Step 2: Now right-click on hard disk C and then click on Properties.

Step 3: On the Properties window, view the Tools pane and click the Check now. Then select the automatically fix file system errors and Scan for and attempt recovery of all bad sectors. Click Start.

Check option

Step 4: Now close the Windows when it is finished.

Solution 4th: Re-install windows:

The next step that you can perform for resolving this issue is to re-install the windows. For all the un-resolved and re-occurring system problems, the best fix is to re-install the Windows operating system.

All you just need to ensure to have a complete system backup and system partition should have enough free space before re-installing the windows.

Solution 5th: Check Hard disk for bad sectors:

When you have found that the issue is not in the partition file system or your system device. Then verification for the hard drive health is another trick for fixing this issue.

Sometimes the reason might have the bad sectors. Therefore, in such scenarios when the cause of the error is bad sectors you need to go for the Windows data recovery software. It seems to be a particular option to get rid of this issue.

Solution 6th: Contact Professional data recovery center:

Not but surely not least, when none of these fore-stated solutions works then it’s better to switch towards or trusting a professional data recovery service provider. This seems to be an ideal option in the end.

These professionals can easily handle all types of cases with great ease and convenience.

Conclusion: The hard drive is the core component of the computer. We use it to store all the valuable data. Thus when it fails, data is at its stake. In such a situation the question arises that how you can fix the Hard drive problems on Windows.

Well depending on your needs and requirements you can choose the approach or follow the steps mentioned above is considered at its best and also minimizes its data loss.

Quick Tips to prevent Windows Detected a Hard Drive Problems:

1: Keep a backup of all your critical data. If possible then create at least two backups- one on the cloud and another on local external storage.

2: Run scheduled chkdsk scans to fix all the file system errors and hard drive problems.

3: Install a reliable antivirus or anti-malware protection.

4: Ensure the proper ventilation so that you can avoid drive overheating.

5: Always try to eject the drive volume before you unplug the external storage media.

Frequently Asked Questions (FAQ’s)

Q1: How to fix Windows hardware error?

Ans: Following are been defined some ways to fix the Windows hardware error:

Step 1: Open Settings.

Step 2: Now click on the update and software.

Update and Security

Step 3: Click on Recovery.

recovery

Step 4: Under the advanced startup section, click the restart now button.

click the restart now button

Step 5: Click the troubleshoot button.

troubleshoot

Step 6: Click the advanced option.

advanced options

Step 7: Click UEFI (Unified Extensible Firmware Interface) settings button.

Click UEFI

Step 8: Click the restart button.

Q2: What does Hardware error mean?

Ans: A hardware error is a malfunction of a hardware component in a computer device. A corrected error is a hardware error that can only be rectified by the firmware and the operating system gets notified about the presence of the error condition.

Q3: How to troubleshoot computer Hardware?

Ans: Perform the following steps of how you can troubleshoot the computer hardware:

1: Firstly you need to make sure that your computer device is not overheating. Somehow if it is closed then you can check the fan whether it is working properly or not. You can also conduct a good dusting once the computer gets turned off.

2: Now boot the device into safe mode before you try to fix the problem.

3: Now test the hardware components and check whether the computer’s memory is free from errors or not.

4: Check for all the incorrectly installed or buggy drivers.

5: Now scan for malware that is causing the crash.

6: At last reset or reinstall the windows.

7: You can also make use of system restore to get your computer back to its previous state. If it works, then it probably contains a software problem on your device.

Q4: How to fix corrupted hardware?

Ans: For fixing the corrupted hardware you can follow the below-given steps and do it in the same way as it has been explained:

1: First restart your computer and if you haven’t then restart it.

2: Restart the hardware.

3: Run SFC.

4: Run CHKDSK.

5: Check your drivers.

6: Check your RAM using memtest86.

7: Fix the faulty hardware page.

Q5: How you can fix Ram on Windows?

Ans: To fix the Ram in Windows watch the following steps of how to fix it:

Step 1: First Right-click on your computer icon and then select Properties.

Step 2: Now select the Advanced System Settings.

Right-click on your computer icon and then select Properties

Step 3: Go to the system properties.

Step 4: Select Settings.

Step 5: Choose Adjust for best performance and then click Apply and OK

Adjust for best performance and then click Apply and Ok

Step 6: Restart your computer.

restart

Final words: In a nutshell, following the above-mentioned steps for fixing the problem of Windows Detected Hard Drive Problems. In this article, we have highlighted all the possible reasons for resolving the issue of Windows Detected Hard Drive problems. We have mentioned all the result-driven solutions and smart tips on how you can get rid of it.

But you need to always keep in mind to take the backup of the data and in case if you don’t have any backup then some data recovery professional tool for Windows and recover lost and deleted data.

Still, if it won’t resolve your problem then you can directly contact us via chat we surely help in solving this problem and make your device free from all kind of errors and bugs.

Leave a Reply

Your email address will not be published. Required fields are marked *