IP address

In most of the cases, it has been found that Windows Troubleshooting just finding the issues but not fixing them well. One such issue is-that Wi-Fi doesn’t have a valid IP address – 2020 after finishing the troubleshooting. Therefore you need to solve the issue manually. In this article, you will learn how to fix this issue on Windows 10.

This problem can usually get caused by several issues. These include incorrect network settings, faulty network drivers, and a lot more. Here we will explain the best solutions for fixing this problem. Also, you will not have to try them all, just work as per your way until you will find the one such solution that works best for resolving this issue.

The Wi-Fi doesn’t have a valid IP configuration can prevent users from accessing the Internet. Also, there are some variations of this error, and here are some of the ones:

1: No valid Configuration in Windows 10: This can usually occur due to the anti-virus security settings. The user should be able to fix this problem by disabling or removing the antivirus.

2: Wi-Fi doesn’t have a valid configuration, Windows 10, Lenovo, HP, Dell devices: It can appear on almost any one of these devices. This is usually caused by drivers. So you need to ensure to update your drivers timely and to the latest version.

3: Wi-Fi doesn’t have valid IP configuration, no internet access: Usually, there are some variations of this error, but these errors can be easily fixed by using the solutions that are been defined in this article below.

Reasons for Wi-Fi doesn’t have a valid IP address on Windows 10

Unfortunately, there isn’t one solution for fixing this error. There are numerous reasons that the troubleshooter could be telling that what’s wrong in it:

Look at the following reasons that why Wi-Fi doesn’t have a valid IP address on Windows 10:

1: You need a new IP address for your computer device.

2: There is a need to update the drivers and un-install those drivers who are interfering.

3: You need to reset the TCP/IP.

4: It might be possible that a third-party application is interfering with your connection.

5: The antivirus software prevents you from connecting to the Internet.

6: Incorrect network settings.

Since there are various reasons where you can see the Wi-Fi doesn’t have a valid IP address – 2020. Here we will walk you through some methods that help in dealing with each of its underlying causes.

Here is how you can fix the Wi-Fi doesn’t have a valid IP configuration error by appropriately adapting these steps:

Step 1st: Reset the Router

Reset the Router - valid IP address

Sometimes a simple reset is all that the user needed to fix this kind of issue. Well, shutting down the wireless network might do the trick in resolving the problem. Learn the steps of how you can reset the router:

1: First and foremost shut down your computer and then shut off your router.

2: Now Unplug the router and wait for at least two minutes before you plug back it into the power outlet.

3: Wait for another two minutes and then turn the router ON again.

4: Once the Router is back on, then your computer device ON.

5: Now check for your internet connections and ensure that your wireless network is on and can be easily accessible.

Step2nd: Un-install your wireless adapter driver:

Un-install your wireless adapter driver

Perform the steps below for uninstalling the wireless adapter driver:

1: Press the Windows Key + X and choose Device Manager.

Device Manager - valid IP address

2: Now locate your wireless device and then right-click on it and then choose Un-install.

3: If it is available then check the Delete Driver Software for the device and click OK.

4: Restart your PC.

restart - valid IP address

Quick Tip: In Window 10 it automatically installs the default wireless driver after restarting it. However, if the default driver works well then you can continue using it. But if there arise some problems then you might have to download the latest driver and install it.

You need to keep in mind that while updating your drivers is an advanced procedure. So being not careful can cause permanent damage to your system and download the wrong driver version. Hence there is a need to use some extra caution.

Step 3rd: Perform a clean Reboot:

Follow the steps below for performing a clean Reboot for your Windows 10:

1: Hold the Windows key and Press R.

2: Now type MSConfig and then press Enter.

3: Select the Services tab.

4: Check Hide all Microsoft services.

5: Click Disable all.

Disable - valid IP address

6: Click the Startup tab and then select the Open Task Manager.

Open Task Manager

7:  Now you need to select the first item presented in the Task Manager and then click Disable.

8: Repeat this step for all the items in the task manager.

9: Close the Task Manager Window.

10: Click Ok in the Startup tab

11: Now restart your computer and it will boot into the clean boot state.

Step 4th: Update Drivers:

The users can update or rollback in case they have recently installed the drivers. They need to delete the network drivers and check whether the drivers causing the issues or not.

1: Hold the Windows key + R together.

2: Type devmgmt.msc or hdwwiz.cpl and then press enter.

update driver

3: Now locate and double click on Network adapters.

Network adapters -

4: Locate your network card and again double click on it.

5: Click the Driver tab and click the Update driver button.

6: Select and search automatically for updated driver software and follow all the additional on-screen instructions.

Step 5th: Disable or uninstall anti-virus:

Sometimes the Anti-virus can be the reason for causing the issue in Wi-Fi doesn’t have a valid IP address – 2020. Sometimes un-installing and disabling it for a while can help in identifying whether the issue is due to anti-virus or not. For identifying this problem you can perform the following basic steps.

1: Right-click on the Anti-virus icon in the system tray (located in the right bottom corner)

2: Now select Disable. However, if you cannot see this option then you will see the option for opening the Anti-virus program. Select the option and Disable it.

Now, if you want to uninstall the software then perform these steps:

1: Hold the Windows Key and press R.

2: Type appwiz.cpl and press Enter.

3: Locate your Antivirus application and click on it.

4: Click Un-install and follow the on-screen instructions.

Note: It is advised to use an application remover tool to completely uninstall the Antivirus and make sure that doesn’t remain any residual files left.

Remember that this is only for checking whether the issue is due to the Anti-virus or not. Once you have checked it then it is advisable to reinstall the Antivirus and make sure that your device is safe from viruses.

Step 6th: Releasing and Renewing IP address:

Both releasing and renewing the IP address from the Command Prompt helps in solving the problem. Follow the steps given below and release your new IP address.

1: Press the Windows Key once.

2: Type cmd in the Start search box. You can also choose Powershell (Administrator) and type cmd in PowerShell before proceeding further.

3: Now Right-click the Command Prompt and click “Run as Administrator”.

4: Type the following command and press Enter:

ipconfig/release

5: Type the following command and again enter:

ipconfig/renew

6: Now type Exit and press Enter

7: Look for your Wi-fi it should be work fine now.

Step 7th: Manually enter the IP information:

Since there is a problem with the IP configuration, so you need to always enter the IP and the other information manually. This problem usually gets occurred is because your system is not getting a valid IP for putting information manually for users.

Follow the steps given below and manually enter IP information:

1: Hold Windows key + R together.

2: Type ncpa.cpl and press Enter.

ncpa - valid IP address

3: Locate the Network that is not working.

4: Right-click the network that you want to fix and then click “Properties”.

5:  Select the Internet protocol version 4 (TCP/IPv4)

Properties - valid IP address

6: Select and use the following IP addresses:

A: Enter 192.168.1.x in IP address. Here you can replace X with any number.

B: Enter 255.255.0 in Subnet mask.

C: Enter 192.168.1.1 in Default gateway.

7: Click and use the following DNS server addresses:

A: Enter 8.8.8.8 in the preferred DNS server.

B: Enter 8.8.4.4 in the Alternate DNS server.

C: Now check the option that says Validate upon exit.

8: Click Ok and then again click on OK.

DNS server - Wi-Fi doesn't have a valid IP address - 2020

Frequently Asked Questions (FAQ’s):

Q1: Why Windows 10 keeps disconnecting from WI-FI?

Ans: One of the most common reasons behind this problem is the WI-FI adapter driver incompatibility. While updating your WI-FI driver with the latest version probably resolves all the issues that can cause your device to keep disconnecting from the WI-FI problem.

Q2: How to stabilize the WI-FI connection?

Ans: Following are been defined as the best ways for stabilizing the Wi-Fi connection:

1: Remove all the possible sources of wireless interference.

2: Position both your router and computer for reducing the physical obstructions.

3: Upgrade your wireless adapter card drivers.

4: Make use of a wireless repeater to extend your router’s range.

5: Set a new wireless channel.

Q3: How to fix a weak Wi-Fi signal?

Ans: Learn the steps below to fix the weak WI-FI signal:

1: Get a modern router and just removed all recent cable from it.

2: Don’t hide the router.

3: Buy a Wi-Fi extender.

4: Check for all router updates.

5: Make use of a long-range router.

6: Kick all your neighbors’ offline.

7: Perform a speed test.

Q4: What blocks the Wi-Fi signal?

Ans: Anything that has metals, doors, furniture, or walls can greatly diminish or terminate the WI-FI signal. The more metal in between the WI-FI router or connected device, the worse the WI-FI signal will be.

Q5: How to extend the Wi-Fi range without losing speed?

Ans: Check the following given sites of how you can extend WI-FI range without losing speed:

1: Check the location of your Router.

2: Avoid turning on distinct wireless devices at one time.

3: Change the channel of your Wireless router.

4: Use a homemade WI-FI extender.

Final words: If you are facing trouble in -Wi-Fi doesn’t have a valid IP address – 2020 then you can follow the above steps and perform it in the same manner as it has been shown.

Any one of the above steps can help in resolving this issue and make your device free from this error. Still, if it doesn’t resolve the problem then you can contact us via chat we will surely help in finding the right solutions for resolving this problem.

Leave a Reply

Your email address will not be published. Required fields are marked *