No WI-FI Access on a Belkin Router

No WI-FI Access on a Belkin Router can be used to access the Internet, but if it doesn’t work properly then what is the fun of having it. The term Belkin Router is the most trusted router brands in the world. It usually offers fast and smooth wireless connectivity to n number of devices.

But nowadays it has been seen that the person is unable to access WI-FI through Belkin router. In this article, you will get the complete guide on how to access WI-FI on the Belkin router. Here is what you have to do.

The successful connection to Belkin Router mainly relies on configured network settings in Windows. So, if you are facing a problem in accessing your Belkin router, then you need to start it by connecting directly to the router via Ethernet cable.

How to Connect a Belkin Router?

Connect a Belkin Router

By the following three ways the user can connect a Belkin Router through these methods:

1: Use Belkin disc set-up.

2: Using Manual set-up.

3: Troubleshooting Belkin router set up.

Reasons for No WI-FI Access on a Belkin Router

No WI-FI Access on a Belkin Router

In some instances, you might encounter internet connection problems while connected to Belkin Router. If you cannot connect to your Belkin router then it can be due to various reasons. However, you can easily fix it by using the following methods

Step 1st: Reset Windows TCP/IP settings:

Reasons for No WI-FI Access on a Belkin Router

1: Click the start button.

2: Enter Command in the search box and then right-click the command prompt icon.

3: Now followed by selecting Run as Administrator to launch the command prompt.

4: Type netsh int IP reset  and press enter.

5: Restart the PC when prompted.

Step 2nd: Connect via Ethernet to Troubleshoot:

1: Connect the Ethernet cable to your Belkin router. This is either given at the top or back of the router.

2: The other end of the router goes into the Ethernet port on your PC.

3: Once the connection between the devices gets established, then open the web-browser of your computer and enter in the address bar, and hit enter.

4: With this, the Belkin Router web-page opens the screen, and still if it doesn’t open then reset TCP/IP settings.

5: Now click the login button and enter the password. However, if you haven’t created a password then leave the field empty and click login.

Step 3rd: Restart your device:

restart your device

For restarting the device perform the following steps carefully:

1: Firstly, unplug the power cable from your modem and your router.

2: Now wait for 30 seconds.

3: Plug the power cable to your modem first and then turn it into your router.

4: Now you can wait for the router and modem lights to light up.

5: Try to connect to the internet and then restart your computer.

Step 4th: Update your wireless driver:

Update your wireless driver

1: Go to the device manager by right-clicking on my computer.

2: Go to the properties.

3: Click on Device Manager.

4: Now right-click network adapters.

5: Select the Drive Tab and Click Update Driver

Step 5th: Reset the router to fix the Belkin router issue:

For resetting the wireless router you will find the reset button at the bottom of the back device. You can either use a pin to press the reset key and hold it for few seconds. This is known as the power-cycle of the Modem.

You can repeat the same step for the router and then with the computer. This way is commonly known as Resetting the Router or also called as Physical Reset. You can also reset the router by the following given steps:

1: Locate utilities on the left side.

2: Now click the restore factory default link and there you will get a lot of information regarding the settings that will be restored.

3: Now click the Restore Default option on the screen and get a dialogue box, and click either yes or Ok.

4: An automatic reboot will be done. Once it has been done then Restart your system.

Step 6th: Set DNS Server Address:

Perform the following steps carefully and do it in the same manner as it has been mentioned:

1: Click the Windows logo > Control Panel.

control penal

2: Now click Network and Internet.

Network and Internet

3: Click the Network and sharing center.

4: You need to click the name of the connection you wish to edit.

5: Click Properties.

Internet Protocol version

6: Select the Internet Protocol version 4 (TCP/IPv4) and click properties.

Internet Protocol version 4

7: Click the radio button that is next to use the DNS server address. This will allow you to enter the DNS server address.

8: The DNS addresses include the Preferred DNS server:, and alternate DNS server:

9: Now click OK on each of your Windows and close the Control Panel.

10: Reset TCP/IP stack. You can also reset the TCP/IP stack in Windows.

11: Go to Start, Run, and type in Command.

12: Now type the following commands:

  • netsh in tip reset reset
  • net Winsock reset

13: Now restart your device.

Step 7th: Check your Router Firmware:

Check your Router Firmware

A Router Firmware contains the encoded instructions for improving the performance of the Belkin router. It could also resolve the issues of previous firmware versions you have. You can click the following links and download and upload the firmware of your Belin router.

1: Download the latest driver of firmware from the Belkin site.

2: Keep your Belkin firmware or driver up-to-date.

3: Updating Belkin Router firmware

Step 8th: Issues with Firewall:

Issues with Firewall

The Firewall or Anti-virus software programs can sometimes block the data packets that are needed to connect Wi-Fi. These programs have also the option to block both ingoing and outgoing communication. It mainly prevents the users to connect to the internet wirelessly.

For resolving the wireless connectivity issue, you need to disable the security settings of the firewall. The in-built firewall software on the computer is also responsible for not connecting properly to the network.

1: Disable Firewall on Windows 7 computer

2: Disable computer Firewall on Windows 8, 8.1 and 10.

Step 9th: Check Wireless Settings to Fix Belkin Router:

Check Wireless Settings to Fix Belkin Router

Look out the steps for checking the wireless settings to Fix Belkin Router:

1: Firstly open and maximize the web interface of Belkin.

2: Look for the wireless tab at the top pane of the new window and click on it.

3: Now click on the Chanel and SSID link present at the top.

4: You will see that there will be a box that says broadcast SSID. Ensure that it is selected. In case if it is not selected then click the Check box against the option.

5: Now click on apply changes and determine whether the problem gets solved or not.

Step 10th: Check Wireless Adapters:

Check Wireless Adapters

The wireless adapters are mainly the receivers of the router signal. Somehow if the wireless adapter on your device doesn’t detect or receive the signals, then check whether it is switched ON/OFF.

Moreover, you can also check if the drivers of your wireless adapter are up-to-date to support the security encryption.

Frequently Asked Question (FAQ’s)

Q1: What do the lights of the Belkin router mean?

Ans: When you saw the orange light is blinking on your router then it signifies that your router is unable to detect the mode. And the reasons for it are:

1: The Modem is turned off.

2: Or the modem is not properly connected to either the router or cable.

Q2: How you can access Belkin Router settings?

Ans: If you are looking for accessing the Belkin Router settings then perform the following steps:

1: Launch a Web-Browser.

2: Enter http://router or you can directly enter the router default IP address and i.e 192.168

3: Now you might be asked to log in with the router admin password. However, if you haven’t set a custom password, then better to leave the password blank and then click submit.

Q3: How you can reset Belkin wireless Router password?

Ans: Following are been defined some steps that show how you can reset Belkin wireless Router password:

1: Locate the Reset button on the back of your Belkin router.

2: Press the button at least for 15 seconds.

3: This will reset both your admin and password and router settings. Therefore you need to log into the dashboard and customize the settings.

Q4: Where is the WPS button on Belkin wireless router?

Ans: Here has been defined some steps that shows where the WPS button is present on Belkin Wireless router:

1: Push and hold the WPS button for at least 2 seconds. It is located on the top of the Belkin F9K1015.

2: Again hold the WPS button of your device for 2 minutes.

3: Now open a Web-Browser.

4: Enter the link “http://Belkin.range“in the address bar and press enter.

5: Under the Extended Network Settings, you can click the Wi-Fi protected Setup (WPS).

Q5: How you can access the Belkin dashboard?

Ans: 1: First and foremost you need to launch a web browser like Internet Explorer and enter the IP address of your Belkin router in the address bar and then press Enter.

2: When you saw that the routers welcome page has appeared, then click dashboard.

3: Now click the advanced settings.

4: Under the WAN settings you can click ISP (Internet Security Protocol) connection type.

Final Words: As such there are lots more errors that people usually face in Belkin Printer are Orange light, Red light Belkin router error that most of the people have reported.

The above-mentioned steps are some general ways of fixing the Belkin Router issue. These methods will help you in fixing the issue and thus you can enjoy the fast internet connection. Still, by using these methods if your problem won’t get sorted then you can contact us via chat we will surely help in resolving the issue No WI-FI Access on a Belkin Router by providing the best methods for it.

Leave a Reply

Your email address will not be published. Required fields are marked *