Runtime 482 error occurs when the user attempts to use the Print form function. Also, when the user tries to attempt to alter the page settings then the Runtime error 482 occurs. This error mainly occurs either due to the system itself or corruption within the file. Runtime Printer error 482 usually occurs on an older system that uses Windows 95, 98, ME, NT, or 2000.
What are the causes of Printer Error 482?
Various reasons cause Printer error 482 and these are:
1: It might be possible that you don’t have a printer installed from the control panel.
2: The Printer gets jammed or out of paper.
3: The printer is not online.
4: You try to print from a printer that accepts only text.
5: A malicious file tries to infect the system.
6: Printer Drivers might be outdated.
7: Windows registry being corrupted.
8: Your Printer is not online.
9: You don’t have an overprotective virus program.
10: Virus is present on your computer.
Note: There could be some more reasons that cause Printer error 482.
How to Fix Runtime Printer Error 482?
When you try to print the documents or files on your Windows 10 then you receive the message Runtime Error 482. In this post, we will be able to help you and identify all the possible causes and provide you the appropriate solutions that you can easily try to remediate this issue.
1: You first need to conduct a physical examination of the printer. But you need to make sure that all the connections between the printer and the computer are Ok and also ensure that the printer doesn’t show messages like Out of Paper, Offline, etc.
2: Now, reboot your computer, and then you need to try to print again and see if the problem has been solved or not.
3: Next, restart the printer and check whether the problem has been solved or not.
4: Try to disable any third-party antivirus program on your PC and if you find that there is any virus or malware then you need to try to print the document again.
However, if these beginning solutions won’t work in order to fix Printer Error 482 then you need to proceed with the following technical steps
Solution 1 – Don’t Use Print Form:
Well, not using the PrintForm helps in avoiding any possible conflicts with the utility. However, it is not a fix and this is a very effective workaround and normally works every time. Thus, to stop using the PrintForm you need to follow the below steps for Windows NT:
1: While calling the EndDoc method after the call to PrintForm helps in fixing the problem.
2: You can make use of Common Dialog control in order to change the page properties instead of using direct assignments to the properties of the printer object.
Solution 2 – Turn Your Printer On:
To turn on your printer follow these steps:
1: First, go to the Start icon on the bottom left of your screen and then choose Control Panel and then devices and printers.
2: Now, right-click the printer and select “see what’s printing”.
3: Next, the Windows that will open here you need to choose the Printer from the menu bar.
4: Next, select using Printer online from the drop-down menu.
Solution 3 – Use Other Printer Settings:
Follow these steps to know how you can use other Printer settings:
1: First, you need to press the Windows Key + S and then type in Printers and Scanners.
2: Now, you need to open the Printers and Scanners and then change the settings.
3: You can also try to print by using different printer settings. Or you can switch from using the standard Print to PDF option and this surely solves the issue. However, if not then continue with the next step.
Solution 4 – Check appropriate Printer Installed:
Perform the given steps to check whether the printer is installed is correct or not:
1: Go to the Control Panel.
2: Now, click on Hardware and Sound.
3: Next, click on Devices And Printers in order to see all connected devices.
4: Click the Printers icon and then “Add a Printer or scanner” to install the printer.
Solution 5 – Switch to Appropriate Printer:
Do you ever try to print a form on a printer that accepts only text? If so, then there should be no other quick fix than switch to another printer that can handle the graphics. It’s quite obvious that you won’t be able to print images on a device that only prints text. Thus, you need to make sure that this is not the case.
Solution 6 – Clean Out the Registry:
Do you know that the Windows registry is basically the core of a large number of error types? Of course, this comes as no surprise as this is the main database storage area for both the software and hardware settings included with the printer settings.
Runtime 482 error can usually get caused by some printer settings inside the registry and damages at some point. In order to solve this issue, you surely need to make use of a registry cleaner that is an automated tool and can help in fixing the damaged settings inside your PC.
Solution 7 – Clear Out Printer Spooler:
Here has been listed some steps to clear out the Print spooler service:
1: Press, Windows + R to open the Run Dialog box.
2: Now, type “cmd” in the search box inside the windows icon.
3: Next, you need to right-click on Command Prompt in the elevated search result and then click “Run as Administrator”.
4: Here in the Command Prompt Window, copy-paste the following command and then hit enter to stop the spooler service.
net stop spooler
5: In order to delete the Printing Spooler files on your computer, copy-paste the following command in Command Prompt and then press enter.
6: Now, you need to start the spooler service again, and to do so, copy-paste this command and then press enter.
net start spooler
7: When you see that the printer spooler service has been started successfully then the message will be appeared, close the Command Prompt Window.
8: Now, you can try to print something.
Solution 8 – Update your Printer Drivers:
Follow these steps to update your Printer drivers:
1: Firstly, go to Control Panel.
2: Now, click on Hardware and Sound.
3: Next, you need to click on Device Manager in order to show all the connected hardware on your Printer machine and then look for the Printers.
4: Right-click the printer that you want to update the drivers and then click Update Driver.
Solution 9 – Clean Out System Files with SFC:
However, if the above steps won’t work accurately then there could be a problem with the core system files of your computer. Thus, in order to fix this issue, you can use an in-built mechanism to resolve it (SFC File Checker)
To perform this step, learn these methods:
1: Firstly, you need to press Windows + S on your keyboard.
2: Now, you need to type “CMD”.
3: Here when the options will be shown then you need to right-click on it and then select “Run as Administrator”.
4: This will bring up the black/White CMD window.
5: Now, you need to type sfc/scannow and thus it will start scanning your system’s files and fixes the damaged issues.
Solution 10 – Close Conflict Programs:
Following has been listed some methods to close Conflict programs:
1: First, press and hold the CTRL +ALT keys and then press the Delete Key.
2: Here the Windows security window appears.
3: From the Windows Security window, you need to click Task Manager or Start Task Manager.
4: Now, this will open Windows Task Manager.
5: From the Windows Task Manager, you need to open the Applications Tab.
6: Now, you need to press the Processes tab.
Solution 11 – Run Disk Cleanup:
Here has been defined some steps to run Disk Cleanup:
1: First, click start and type Disk Cleanup in search bar.
2: Now, click Disk Cleanup.
3: Next, at the drive list, you need to select which drive you want to “Run Disk cleanup” on.
4: Now, select which files you want to delete.
5: Click Ok.
6: Click Delete files.
Solution 12 – Re-install Runtime Libraries:
It might be possible that you are getting this error because of an update like the MS Visual C++ package which might not be installed properly. Then what will you do in this situation is to uninstall the current package and then install a fresh copy?
To re-install Runtime libraries perform the following steps:
1: First, press the Windows Key + R.
2: Now, enter appwiz.cpl and then hit enter.
3: Next, you need to locate the Microsoft visual C++ programs in the list.
4: Here you need to select each entry and then click Uninstall.
5: Finally, you can download a fresh copy of Microsoft Visual C++ Runtime from here and then install it again.
Some other steps that you can follow to remove this error are:
1: You first need to uninstall the package by visiting Programs and Features and then you have to highlight the Microsoft Visual C++ Redistributable package.
2: Now, you need to click un-install on top of the list and once it is done then you can reboot your computer device.
3: Next, download the latest redistributable package from Microsoft’s official site and then install it.
Solution 13 – Re-install Graphics Driver:
Here has been listed some steps to re-installing Graphics Driver and these are shown below:
1: In the search box on the taskbar, you need to enter device manager and then select Device Manager.
2: Now, right-click the name of the device and then select Uninstall Device.
3: Restart your PC.
4: Here the Windows will attempt to reinstall the Graphics driver.
Solution 14 – Scan For Virus:
To scan for virus learn these following steps:
1: First, select Start>Settings>Update and Security>Windows Security and then Virus and Threat protection.
2: Now, you need to open Windows Security settings.
3: Under Current threats, you need to select Quick Scan and this will start for any malware or viruses.
Solution 15 – Uninstall Third-party Antivirus Software:
In order to un-install Third part antivirus software you need to look for these steps:
1: First, open the Control Panel.
2: Now, go to Programs and Features.
3: Next, you need to select the application that you want to remove and then click Uninstall.
4: If prompted for confirmation, you need to click Yes.
5: Now, click Ok in the dialog box with the message that the uninstallation was successful.
6: Finally, the application will be gets removed from your computer.
Solution 16 – Update Conflict Programs:
Follow the given steps to update Conflict Programs:
1: 1: Press, Windows + R to open the Run Dialog box.
2: Now, you need to type msconfig on the search box and then click it to open.
3: Next, click on the Services Tab.
4: Hide all Microsoft services.
5: Click Disable All Button and then click Apply.
6: Click Ok to restart your computer when you are prompted.
Solution 17 – Remove Jammed Printer:
In order to remove Jammed Printer look for these steps:
1: Turn off the Printer.
2: Now, you need to open all the latches to check where the paper is been stuck.
3: You also need to check for askew paper and then gently pulls the sheets to remove them from the printer.
4: Now, close all the latches in order to turn on the printer.
5: However, if the printer still refuses to print then you need to check again for loose bits of paper.
Solution 18: Run DISM scan:
Well, before you start with the DISM scan process, you first need to ensure that you have a stable internet connection in order to download the fresh copies and replace the corrupted data
To run DISM scan look for the following given steps:
1: First, press the Win + S keys to open the Windows search box.
2: Now, into the text field, you need to type the command.
3: Next, right-click the Command Prompt and then click “Run as Administrator”
4: Here in the Command Prompt window you need to type the following command and then hit enter.
DISM /Online /Cleanup-Image /restorehealth
5: Now, let the Windows system execute the command.
Note: It is important to remember that using both SFC and DISM commands helps in resolving the system registry issues. No doubt, these both have different functional approaches regarding fixing the corrupt system files. By using them together it will help in improving the chances of resolving the issue.
Solution 19 – Reinstall Printer:
Look for the below-given steps to re-install the Printer:
1: Select the Start button and then select Settings>Devices>Printers and Scanners.
2: Now, under the Printers and Scanners and then find the Printer and select it and then select Remove Device.
3: Once you removed your Printer, then add it back again by selecting Add a Printer or scanner.
Solution 20: Use Add a printer option:
Perform the following steps in order to add a Printer option:
1: First, click on the Search box (Windows Icon) and then you need to type Printers and Scanners.
2: Now, in the elevated search results window, you need to click on the Printers and Scanners.
3: Next, in the Settings Window and on the left-hand side you can check if you can see your Printer in the list of the installed device.
4: However, if you cannot see the printer in the Settings Window then you need to simply click on Add a printer or scanner.
5: Here the Windows will now look for available printer devices.
6: You will also see the Printer device in the Settings Window.
7: Now, close the Settings Window and then try to print the document again.
Solution 21: Re-install Conflicting Programs:
Refer to these steps to re-install the conflicting programs such as:
1: For Windows 10, you just need to type Control Panel on the search box and then click the result and then click Control Panel.
2: Once you are inside the Programs and Features, then you need to click the problem program and then click Update or Uninstall.
3: However, if you choose to update then you just need to follow the prompt in order to complete the process. In case if you will choose to uninstall then you should follow the prompt to uninstall and then re-download or use the application installation to reinstall the program.
Solution 22: Install a Printer:
The Runtime error 482 usually gets caused because your computer doesn’t have an installed printer. Thus, to solve this problem you might need to install a printer.
1: First, open the Control Panel.
2: Now, you need to double-click the Printers icon.
3: Next, click Add Printer to install a printer.
4: Now, you can install a printer via the settings app.
Solution 23: Remove the Print queue:
The term print queue is defined as in which Windows can manage most print jobs. And removing it can be very effective and can be easily done in the services.msc window or either in the Command Prompt.
1: First, press Windows Key + S and then write the cmd.
2: Now, to open the Run as Administrator you need to type the following command: net stop spooler
3: Next, you need to enter: del %systemroot%\System32\spool\printers
4: Finally, you need to type the following command again and then press Enter: net start spooler
5: However, if you make use of this step on a server then you need to make sure that no other print jobs are processed on other printers as these also get deleted.
Frequently Asked Questions (FAQ’s)
Ans: To get rid of the Printer status error, follow these given steps:
1: First, make port settings changes by pressing the Windows logo key + R on your keyboard.
2: Now, you need to type devmgmt.msc and then hit enter to open the Device Manager.
3: Next, make sure that the Printer is online.
4: Re-install the Printer driver.
5: Now, set the Print Spooler service to Automatic.
6: Next, update Windows.
Q2: How you can fix HP printer errors?
Ans: In order to fix HP printer errors, try these given steps:
1: First, make sure that the Printer is turned On.
2: Now, check if the printer is connected to your computer properly.
3: You need to make sure that ink is loaded enough.
4: Now, try starting printing the document.
Ans: Follow these given methods to fix the printer that won’t print:
1: You need to check for your Printer error lights.
2: Clear the Printer queue.
3: Check for the connection.
4: Ensure that you have the right printer.
5: Install the Drivers and Software.
6: Add a printer.
7: Check that the paper is installed not jammed.
8: The printer should be fiddle with ink cartridges.
Q4: How you can reset HP printer settings?
Ans: In order to reset HP printer settings learn for these steps:
1: From the screen on your computer, navigate to setup.
2: Now, tap tools.
3: Next, tap Restore Defaults.
4: Tap yes.
5: Here the printer will get restarted.
6: Once the printer gets restarted then your printer will have been reset to factory default settings.
Q5: What are the methods for deselecting the printer offline?
Ans: Look for these steps to deselect the Printer offline:
1: Firstly, select the Control Panel.
2: Now, click Devices and Printers.
3: Next, you need to find and right-click the affected printer.
4: Click the Printer and check use printer offline mode is enabled.
5: Select disable if it is enabled.
6: Now, close all open Windows.
So, in this article, we have defined all the possible solutions that help in fixing the Printer Error 482. You can try these solutions in order to fix this issue. However, if all the above-given solutions don’t resolve the issue then you might consider that the printer is jammed or out of paper or some anti-virus software has not done its job.
Sometimes a malicious file infects the system and thus causes the error. While some of the errors depend on the printer. Thus, in this case, the user needs to reinstall the affected software to resolve printer error 482.
Still, if this won’t work then you can contact our experienced technicians and get help from them. You can connect with our experts via chat and we will surely help you in fixing this problem. So, feel free to contact us today and get in touch with our experts in order to get hassle-free solutions.
We have all the solutions that help in solving printer-related problems within a specific amount of time. Please let us know in the comment section below how would you like the article and ask your queries freely.