Wi-Fi Range Issue on Windows 10

Today, weak Wi-Fi signal or Wi-Fi range issue in Windows 10 has become pretty common among users. And, apart from the weak Wi-Fi signal, the users are also facing several other issues related to Wi-Fi. These issues include slow Wi-Fi speed, Wi-Fi connection suddenly dropping, and sometimes not being able to connect to Wi-Fi automatically, and several others.

So, here in this article, we are going to explain the best troubleshooting methods that help in boosting the Weak Wi-Fi signal on Windows 10. You can try these methods and resolve the Wi-Fi range issue on Windows 10.

Why is your Wi-Fi Signal out of Range on Windows 10?

Well, there can be various reasons from where your Wi-Fi signal seems out of range in Windows 10 and these are:

1: The user is outside the access point coverage.

2: Sometimes network is hidden in the router parameters.

3: Failure of the router.

4: Different standards of Wi-fi and some access point parameters.

5: Outdated driver.

6: Failure of the wireless module.

7: Incorrect operation of the software.

How to Fix Wi-Fi Range Issue on Windows 10?

The Weak Wi-Fi signal means you are connected to a wireless network but the connection is not so strong or stable. When you are using your windows 10 and suddenly your signal drops then it is possible that you can experience failed uploads, downloads, constant buffering, or loading or reloading the video. Thus, it becomes quite difficult for a user to manage things.

Now, there is no need to get panic as we will explain the best troubleshooting methods to fix this error. Keep Reading below!

Solution 1 – Set your Wi-Fi Sensibility Value to Maximum:

Most users have claimed that changing the sensibility value can help in fixing the Wi-Fi range issue in Windows 10. So, in order to change the sensibility value, you need to perform the following steps:

1: First, you need to press the Windows Key + X and then select Device Manager from the list.

Device Manager

2: On the Device Manager, open and locate your Wi-Fi adapter and then right-click it and choose Properties.

 

network adapters Properties

3: Now, go to the Advanced tab and then locate Roaming Sensitivity level, Roam Tendency, and Roaming Aggressiveness to Highest mode.

set roaming sensivity to highest

4: The next thing that you need to do is to Transmit power to the highest level.

transmit power

5: Select Antenna Diversity and then set it to Auto.

6: Now, in Band Preference you need to choose Prefer 802.11a. Also, if your wireless network is using 5GHz frequency then set it to Prefer 802.11g/b

802.11n channel

7: Now, save changes and then Restart your device.

restart your device

Solution 2 – Update Wi-Fi Driver:

If you found that your Wi-Fi network driver is outdated or faulty then it may cause all the trouble. Thus, you need to update the Wi-Fi driver and fix the Wi-Fi range issue on Windows 10.

Follow these steps manually:

1: First, press the Windows + X keys on your keyboard.

2: Now, from the Win + X menu, you need to click on Device Manager.

Device Manager

3: Here the Device Manager will get open with the list of drivers.

4: Look for the Network Adapters dropdown in the list of drivers.

5: Click the Network Adapters option to expand it and then locate the Wireless Internet driver.

6: Do a right-click on the Wi-Fi driver and then you need to click the Updates driver software option.

Update your wireless driver

7: Now, in the Update Driver windows that opens, you need to click on the Search automatically for driver software option.

click on search automatically to fix Wi-Fi Range Issue

8: Here your PC will begin looking for an updated version of the Wi-Fi network driver.

9: Once the new version is found that Wi-Fi driver will get updated.

10: Now, restart your PC in order to complete the update process, and however if your driver is already updated to the latest version, or if the update doesn’t fix the weak Wi-Fi signal problem then you need to try the next method.

restart your device

Solution 3 – Check Wi-Fi Card:

If you are operating a PC, then it is essential to give your Wi-Fi network card a check. Sometimes it happens that the Wi-Fi card causes this issue. If the Wi-Fi card is loosely connected to your PC or if there accumulates dust on the card then it can lead to a weak Wi-Fi signal. Thus, you need to try to connect the Wi-Fi card to see if that works. An old Wi-Fi card could also be the reason that why your PC is not getting enough Wi-Fi signal. So, you need to replace your PC’s Wi-Fi card if you think that it’s old.

Solution 4 – Change Wi-Fi MTU:

Another method that you can try to fix the weak Wi-Fi range issue on Windows 10 is you can change the MTU value i.e Maximum Transmission Unit of your Wi-Fi adapter.

Here is how you can change the Wi-Fi MTU value:

1: First, you need to press Windows + X and then click on Command Prompt in the menu that opens.

command prompt run as administrator

2: Now, in Command Prompt window, you need to type netsh interface ipv4 show subinterfaces and then hit Enter.

3: Next, you need to note down the name of your Wi-Fi adapter that appears and it could be a wireless Network connection or Wi-Fi.

netsh interface ipv4 show subinterface to fix Wi-Fi Range Issue

4: In the command prompt window, you need to type the command i.e given below:

netsh interface ipv4 set subinterface “Wi-Fi” mtu=1400 store=persistent

5: Now, press Enter.

Some more Additional steps:

1: In Command Prompt, you need to type ipconfig/flushdns and then press Enter.

2: Now, type netsh winsock reset catalog and then press Enter.

3: Type netsh int IP reset and then press Enter.

Solution 5 – Change Network Adapter Power Management:

Sometimes Windows 10 can power down certain devices to save energy. It mostly does this when the system has been idle and it will power them back. So, you can try disabling it for your network adapter.

1: Firstly, open the Power options.

Power options

2: Now, click Change Plan settings i.e next to your active power plan.

change plan settings to fix Wi-Fi Range Issue

3: Next, click Change advanced power settings.

Change Advanced Power Settings

4: Here on the Advanced power settings window, you need to expand Wireless Adapter Settings.

5: Now, you need to open the battery and plug in dropdowns and then select Maximum performance for each.

6: Restart your PC.

restart your device

Solution 6 – Run Network Troubleshooter:

Sometimes the network troubleshooter can help in fixing the weak Wi-Fi signal problem:

Here are some steps for it:

1: First, open the Settings app.

start and settings

2: Now, go to the Update and Security group of settings.

update and security to fix Wi-Fi Range Issue

3: Next, you need to select the troubleshoot Tab.

4: Here you need to select and run the Network Adapter Troubleshooter.

network adapter trobleshooter

5: Now, apply any changes that it recommends.

6: You can also try running the internet connections troubleshooter.

Solution 7 – Reset Network Adapter:

In order to reset the Network adapter, you need to try the following steps:

1: First, open Settings.

start and settings to fix Wi-Fi Range Issue

2: Now, you need to click on Network and Internet.

Network and internet

3: Next, click on Status.

STATUS to fix Wi-Fi Range Issue

4: Under the Advanced network settings you need to click the Network reset option.

network reset

5: Now, click the Reset now button.

6: Click the Yes button.

reset now to fix Wi-Fi Range Issue

Solution 8 – Disable and Enable your NIC:

In order to enable Network Interface Card, perform these following steps:

1: Press the Windows + R and then type ncpa.cpl and then press enter.

ncpa

2: Now, right-click on the Wireless adapter and then click on Disable.

disable wireless connection

3: Again, right-click on the wireless adapter and then click on Enable.

enable wireless connection to fix Wi-Fi Range Issue

4: Now, Restart your PC and then try to connect to the Wi-Fi network.

select restart

Some more additional steps to follow:

1: First, open the Control Panel.

control panel

2: Now, set view by to Category.

3: Next, click on Network and Internet.

Network and Internet to fix Wi-Fi Range Issue

 

 

4: Click on Network and Sharing Center.

Network and Sharing center

5: Now, on the left pane, you need to click Change Adapter Settings.

Router Connection Problems to fix Wi-Fi Range Issue

6: Right-click the local area network connection that is connected to the radio hardware and then selects Properties.

7: Now, on the Networking tab of the Properties dialog box, you need to clear all questions except the Internet protocol version 4.

Internet Protocol version 4

8: Now, double-click the Internet Protocol version 4.

9: On the General Tab, you need to select Use the following IP address.

10: Now, instead of using 192.168.1 you can use the subnet address given by your hardware.

11: Next, leave the subnet mask set to the default value 255.255.255.0 and then click OK.

To disable the NIC, look for these steps:

1: First, go to the Start menu and then open Control Panel.

control panel to fix Wi-Fi Range Issue

2: Now, open Network and Internet and then open Network and Sharing center.

Network and Sharing center to fix Wi-Fi Range Issue

3: Next, in the left-hand column, you need to click Change adapter settings.

Router Connection Problems

4: Here a new screen will open with a list of network connections.

5: Now, right-click local area connection or wireless connection and then select Disable.

disable wireless connection

Solution 9 – Update your Router Firmware:

Following has been listed some steps to update your Router Firmware:

1: First, you need to type your router’s IP address into the search bar of any web browser.

2: Now, enter your username and password.

3: Locate the Firmware or update section.

4: Go to your router manufacturer’s website.

5: Now, download the firmware update file.

6: Extract the file and then move it to your desktop.

7: In the update section, you need to click on Choose File or Browse.

8: Select the router update file on your desktop.

9: Start the upgrade process.

10: Now, wait for the process to finish.

11: Next, reboot the router once the firmware has been fully applied.

Solution 10 – Use Wireless Access Point:

If you have range issues with your Wi-Fi connection then you might need to consider using the Wi-Fi repeater or Wireless Access point. In order to fix the Wi-Fi range issue, you can make use of wireless access points which is a perfect solution to solve this issue.

Solution 11 – Change Router Wireless Channel:

If you see that there are multiple wireless networks available then there might be some interference problem and especially for all those networks that are using the same network channel.

So, to fix this issue it is important to set up the wireless channel manually. To see how you can do that you can check your router’s instructions manually.

Follow the below-given steps to change the Router Wireless Channel:

1: First, open a web browser, and then you need to type your router’s IP address into the address bar.

2: Now, hit enter on your keyboard.

3: Next, enter your username and then the password.

4: Now, open the Wireless Settings.

5: Next, you need to click the channels drop-down menu and then change your Wi-Fi channel.

6: Now, make sure to hit Save or Apply.

Solution 12 – Set Antenna Diversity to Auxiliary:

As per the report of few users, setting antenna diversity can help in fixing the Wi-Fi range issue, and to do that you need to follow these given steps:

1: First, open the Device Manager and then locate your wireless adapter and then right-click it and choose Properties.

network adapters Properties to fix Wi-Fi Range Issue

2: Now, go to Advanced Tab and then set Antenna Diversity to Auxiliary.

3: Next, save changes and then check the issue has been resolved or not, and if not then continue with the next step.

Solution 13 – Maximize Wi-Fi Adapter Performance:

The wireless adapter is usually set to work in medium power saving mode on and this sometimes can cause the issues in Wi-Fi range. So, to fix this problem it is advisable to change the Wi-Fi adapter power settings to maximum performance.

To perform this method, you need to follow these steps:

1: First, you need to press the Windows Key + S and then enter the Power option.

2: Now, you need to select the power options from the menu.

Power options

3: Next, open the Power options window and then locate your current plan and then click the Change Plan Settings.

change plan settings

4: Click on Change Advanced power settings.

Change Advanced Power Settings to fix Wi-Fi Range Issue

5: Now, locate the wireless adapter settings and then set the Power saving mode to Maximum performance.

6: Next, click Apply and then Ok to save the changes.

7: You can also switch to the high-performance mode in Power options and the power saving mode will be automatically set to Maximum performance.

Solution 14 – Change Router Frequency:

Most modern routers use a 5GHz frequency, so if your router supports it then make sure that you are using it. Also, by using 5Ghz frequency you will encounter less interference and thus you will get a stronger signal. In order to switch to 5GHz frequency, you need to check your router manual for detailed instructions.

Follow these given steps to change the Router frequency:

1: First, you need to enter the IP address 192.168.0.1 in your internet browser.

2: Now, leave the user field empty and use Admin as a password.

3: Next, select Wireless from the menu.

4: In the 802.11 band section filed, you need to select 2.4GHz or 5Ghz.

5: Click on apply to Save the settings.

Solution 15 – Disable Bluetooth:

Few users have reported that you can fix the weak Wi-Fi signal problem by disabling your Bluetooth adapter. To do that follow these given steps:

1: Open your Device Manager and you can do that by pressing the Windows Key + X and choose the Device Manager from the menu.

2: Once the Device Manager gets starts, then go to the Bluetooth section and then expand it.

3: Now, locate your Bluetooth adapter, and then you need to right-click it and then select Disable from the menu.

Bluetooth and other devices to fix Wi-Fi Range Issue

Solution 16: Change Wi-Fi Adapter Antenna:

Both routers and Wi-Fi adapters come along with a switchable antenna and therefore, if you are having any Wi-Fi range issues then you might consider replacing your Wi-Fi antenna with the stronger one. So, if you are buying a new Wi-Fi antenna then you need to make sure that you get the high-gain antenna for the best performance and Wi-Fi range.

Solution 17 – Replace Modem or Router:

Sometimes the Hardware can also become the cause for Wi-Fi range issue. Therefore, if you are using an old modem or router then maybe it’s time to replace it with the new one. The wireless networks have their advantages but they can also experience issues with range. Hence to avoid this situation it’s better to replace the modem or router in order to fix this issue.

Solution 18: Temporary turn off Firewalls:

Sometimes the firewall software might prevent you from getting connected. Also, you can see if the connection issue is caused by a firewall then you need to temporarily turn it off. Usually, to turn off a firewall software you need to first check out the documentation for your firewall software You also need to make sure that you turn it back on as soon as you can. While not making the firewall on can make your PC vulnerable to hackers.

Also, if you are having trouble turning off your firewall then do the following steps and ensure that you turn on your firewall as soon as you can.

To turn off all firewalls, you need to follow these steps:

1: In the search box on the taskbar, you need to type Command Prompt and then press and hold the Command Prompt and then select Run as Administrator> Yes.

2: Now, at the Command Prompt, you need to type netsh advfirewall set allprofiles state off and then hit Enter.

3: Next, you need to open your web-browser and then visit a website you trust and see if you can connect it or not.

4: Now, to turn on all firewalls that you have installed at the command prompt, you need to type netsh advfireall set all profiles to state on, and then press enter.

5: When you find that the firewall software is causing the connection issues, then you need to contact the software manufacturer or visit the website to check if the software is available.

Solution 19: Network Reset Option:

However, if you are using the latest Windows 10 version then you might get a Network reset option and it helps in fixing the problem and get back your connected Wi-Fi network. It also removes the network adapters that you have installed. After your PC gets restarted then the network adapters get re-installed and the settings are set to the defaults.

1: To perform network Reset, you need to Press Windows + I to open Settings>Network and Internet>Status>Network Reset.

network reset

2: On the Network reset screen, you need to select Reset Now>Yes to confirm.

reset now to fix Wi-Fi Range Issue

3: Now, wait for your PC to restart and see if this helps in fixing this problem and if not then check the next step.

Solution 20: Make sure that nothing disrupts the Wi-Fi signal:

Your Wi-Fi range issues sometimes can cause hardware issues that interfere with the Wi-Fi signal. Therefore, you need to remove the pieces of equipment which you think can block or limit the wi-Fi range.

Frequently Asked Questions (FAQ)

Q1: How you can fix Wi-Fi i.e out of range?

Ans: Following has been defined some steps that help in fixing Wi-Fi out of range:

1: First, get a Modern Router.

2: Buy a Wi-Fi extender.

3: Now, you need to check for Router updates.

4: Use a long-Range router.

5: Perform a speed test.

Q2: How you can fix the Wi-Fi range on your computer?

Ans: Refer to these following steps to fix the Wi-Fi range issue on your computer:

1: First, you need to open the Settings app.

2: Now, go to the Update and Security group of settings.

3: Next, select the Troubleshoot tab.

4: Again, select and run the Network Adapter troubleshooter.

5: Now, apply any changes that it recommends.

6: Next, you should try running the internet connections troubleshooter.

Q3: How you can fix a low Wi-Fi signal?

Ans: In order to fix the low Wi-Fi signal issue, follow these steps:

1: Move your computer closer to the router.

2: Now, update the drivers for your wireless network adapter.

3: Replace your Wi-Fi adapter if your computer is connected to any wireless network.

4: Now, move your router closer to your computer device.

5: Set your router to use a different wireless channel.

Q4: What are the methods for boosting the Wi-Fi range?

Ans: Follow these methods for boosting Wi-Fi range:

1: First, select a good place where you can place your router.

2: Now, keep your router updated.

3: Get a stronger Antenna.

4: Cut off Wi-Fi leeches.

5: Buy a Wi-fi repeater.

6: Switch to a different Wi-Fi channel.

7: Use the latest Wi-Fi technologies.

Q5: How you can boost the Wi-Fi signal on Laptop?

Ans: Refer to these steps to boost Wi-Fi signal:

1: First, update your network adapter drivers.

2: Now, you need to set the wireless adapter to work in maximum performance mode.

3: Check if your wireless card is working correctly.

4: Change the sensibility value.

5: Disable Bluetooth.

6: Set antenna diversity to Auxiliary.

7: Check if your card is properly installed or not.

Final words

In this article, we have defined all the possible steps that help in fixing the Wi-Fi range issue on Windows 10. You can try these steps and see which method works best for you.

However, if this won’t solve the issue then you can contact our team of experts and get help from them. We are all time available so in case of any queries, get in touch with us. We deliver hassle-free solutions to all printer-related problems.

So, get our assistance today. Also, if you would like the article, then don’t forget to comment on us. So, feel free to contact us today. And if these solutions work in fixing the low Wi-Fi signal problem then let us know which option worked for you.

Leave a Reply

Your email address will not be published. Required fields are marked *