Safe Mode Crashes in Windows 10

Safe Mode Crashes in Windows 10? Let Discuss…

Safe Mode has been an outstanding troubleshooting component of Windows following the operating system’s introduction. Safe Mode got an extensive upgrade besides Windows 10, coming up with innovative highlights making it more potent than regular features.

The most amazing feature of safe mode is that it unveils windows with the meager outlay of segments essential, with or without network (Internet) connection. When you experience difficulty with Windows, commencing up your PC in Safe Mode can assist you to get back to an efficient system.

On the other hand, sometimes every option one tries fails or issues some error, and while your computer restarts, you still come back to the same screen problem.

Reasons for Safe Mode Crashes in Windows 10?

Some of the reasons why safe mode crashes in window 10 are given below:

  • The booting process became agile than it was originally.
  • It is can also be provoked by third-party interference on behalf of the default settings.
  • Central device operators.
  • There is something faulty with Windows running operation and it needs fixing.
  • Outdated hardware operators.
  • An anti-virus on your Desktop.

How to Fix Safe Mode Crashes in Windows 10:

Windows 10 PC is not running thoroughly? Once the PC is tainted with malware, virus, or connected some inappropriate operators, it may not function as usual as it does, and suspend or halt now and then.

Windows 10 Safe Mode may be effective to aid you to identify and mend the issues. So, here we provide you with every kind of solution to begin Windows 10 in a Safe Mode:

Solution 1 – Perform Check Disk Scan to Fix Safe Mode Crashes:

One should systematically manage the Check Disk engine to monitor the probity of disks. These help in examining disks and can repair multiple kinds of common faults on FAT16, FAT32, and NTFS drives. One of the methods is that Check Disk determines errors is by analyzing the extent of the bitmap with the disk divisions attached to data in the file operation. Check Disk can’t restore corrupted data inside files that seem to be structurally entire. You can operate Check Disk from the control line or within a graphical exchange.

Solution 2 – Check Your System RAM to Fix Safe Mode Crashes:

It could be tough to discover the origin of the issue. Nevertheless, memory is the initial matter you’d need to review once. This is because if it’s an obstacle with one of the modules, you should work on repairing this issue immediately, as it cannot only prompt your PC to lapse but can also misleading files but can also corrupt files.

1. Start Control Panel.

control panel to Fix Safe Mode Crashes in Windows 10

2. Tap on System and Security.

Then select System and Security

3. Tick on Administrative Tools.

Administrative Tools to Fix Safe Mode Crashes in Windows 10

4. Now you need to double-click the Windows Memory Diagnostic.

Windows Memory Diagnostic

5. Now click on Restart Now and check the problem.

restart now and check for Problem

Solution 3- Execute a System Repair to Fix Safe Mode Crashes:

If your system collapses or is unstable, turning System Repair in Safe Mode affirms the method results. It goes as follows:

1. Start your computer and click “F8” frequently until the Windows advanced title list surfaces.

2. Double-tap on “Safe Mode with Command prompt”.

Safe Mode with Command prompt to Fix Safe Mode Crashes in Windows 10

3. Log in with an official account if required. Once there is a request option, inscribe “rstrui.exe” at the front and click on”Enter” to proceed.

4. This will lead you to the link of System Restore. Last but not least click “Next” to an open restore feature. And then, follow the direction to finish the system restore.

Solution 4- Check your System for Virus or Malware:

In Safe Mode, you can manage Windows Defender to lift a malware contagion that was obstinate to switch into a regular system because it’s not prolonged in the backdrop. Windows 10 has a mechanism called Windows Defender Offline scan which examines your system when Windows isn’t commanding. This way, even the common undetectable malware will be discarded because it can’t intervene with Windows.

To reach the tool:

1. Turn to Settings > Upgrade & Security > Windows Protection >Virus & threat protection.

virus and threat protection to Fix Safe Mode Crashes in Windows 10

2. Click on “Scan options” and then go to “Microsoft Defender Offline scan.”

3. Snap-on “Scan now” to begin the action.

Microsoft Defender Offline scan

Solution 5- Perform System File Controller:

While the System File Checker or also known as sfc.exe helps to scan and reclaim corrupted Windows system lists. You can command it to verify whether it can support initiating Safe Mode work again.

1. Start an advanced request immediately.

2. If you are operating Windows 10, Windows 8.1, or Windows 8, initially run the in text Deployment Image Servicing and Management (DISM) instrument before working the System File Checker.

3. Copy the latter command, and then click Enter. It may require few minutes for the requested order to be concluded. (DISM.exe /Online /Cleanup-image /Restore health)

dsim healthrestore to Fix Safe Mode Crashes in Windows 10

Solution 6 – Run System Diagnostics:

If you are still not able to Fix Computer crashes in the Safe Mode problem then odds are your hard disk might be declining. In this case, you require renewing your former HDD or SSD and downloading Windows again. But before moving on to any decision, one must try the Diagnostic medium to counteract. To operate Diagnostics reboot your system and then push the F12 tab and while the Boot panel appears, feature the Boot to Utility Partition title or the Diagnostics option and click enter. This will notify you if any error is detected.

Solution 7- Boot with Last Known Configuration:

This can be done as follows:

1. Switch off your system entirely, restart it, and attempt to locate the Windows Recovery Environment Option.

2. After accessing the Windows Recovery Environment, you will notice the “Choose an option” side.


3. Now sway through the options as follows: Troubleshoot> Advanced title>Startup Settings> Rstart.

restart in safe mode

4. Ultimately, your PC will reboot immediately. Lastly, you will observe a menu of several prospects, so pick Safe mode and you’re there.

Solution 8 – Run DSIM Commands:

Windows 10 incorporates a command-panel service called DISM which stands for Deployment Image Servicing and Management. DISM Windows 10 can be applied to restore and equip Windows icons, Windows Setup, and Windows PE. Not only this but DISM can also be used to mend the replacement image within the power of the operating tool.

To repair Windows 10 using DISM commands:

1. To verify whether there is any exploitation, Work the command string as administrator, then copy the following scribe and click “Enter”: DISM /Online /Cleanup-Image

dsim healthrestore to Fix Safe Mode Crashes in Windows 10

2. To examine the Windows picture for any degradation, type command, and tap “Enter”.

3. To restore the Windows form, copy the command and push “Enter”.

Solution 9 – Upgrade the Windows:

An absent or outmoded operator in your PC can induce your system to malfunction, so you should retain the operators in your system up to date, and update those that are outdated. There are two methods to update drivers: manually and automatically.

You can manually go to the site of your hardware appliance, find the most advanced driver that fits with your working system, and install it on your PC.

Solution 10. Reinstall your Windows:

If none of the preceding solutions help you then you can be certain that your hard disk is well-made but your system might be failing in Safe Mode due to the operating tool or it is corrupted. In that case, you can attempt to Reinstall Windows but if this too declines then the only answer is to establish a new model of Windows.

Frequently Asked Questions:

Q1. Why are windows 10 causing an error even in safe mode?

Ans. As soon as you notice the Windows icon restart your system 2-3 times.

  • You will be notified with a text: Developing Automated Repair.
  • Then next tap on Advanced Panel.
  • Choose Troubleshoot and push on the start repair option.
  • Wait for the repair to finish.

Q2. The system is not showing all the apps even after rebooting. How can I repair this issue?

A. You can attempt to reset the system in regular form by following these measures:

1. Go to Settings > Update & Protection > Restore

2. Tap on “Get Started”.

3. Choose “Eliminate everything”.

Then follow the on-screen text to proceed and voila!

Q3. How to Commence Windows 10 in Safe Mode?

1. Click and hold the Shift tab and choose Start > Power > Restart.

2. Push Troubleshoot > Advanced panel > Startup Settings > Reboot after you open into Win-RE.

3. Click F4, F5, or F6 key to commence into Safe Mode in Windows 10.

Q4. How can I fix the F8 window key instantly?

A. Write cmd in the Research box, right-click on Command from the search result list and pick Control as administrator from the notification list. Then, tick on the Yes key to verify.

Step 2: You can copy-paste the following into the Command Prompt space and click Enter:
bcdedit /set {default} bootmenupolicy legacy

Step 3: Then, you can restart your computer to see whether you can press the F8 key to enter Safe Mode.

Final Words

Safe Mode working not so safely? Don’t worry these issues happen. The answers presented in this column can aid you to resolve the issues in no time and very effectively. Just follow the steps given

If you still encounter some errors you can contact us via the chatbox on the left corner or look into the FAQs section on the bottom or comment section. Any valuable ideas and recommendations are also welcomed. Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *