Your browser performs various tasks in the background to ensure safety and protection from dangerous sites. Though your browser tries to keep you safe from most dangers, it is still important to pay attention to them. In this article, we will be discussing the solutions to the problem of Wi-Fi Certificate Error on Windows 10.
One of the blunders you might experience while exploring through a browser is a “There is a problem with this website’s security certificate” cautioning. At first, this might appear as something to worry about, as its phrasing suggests that your security is in danger.
But, in any case, this blunder can show up even on sites we know to be 100% secure and are sure about. Generally, these cautions are not the issue of your PC or your internet browser. Instead, these certificates are what sites use to demonstrate they are who they say they are on the web, and if your browser recognizes an issue with authentication or even the shortfall of one, it will give a warning.
Why does Wi-Fi Certificate Error on Windows 10?
Wi-Fi Certificate Error on Windows 10 can be caused due to the following errors or situations:
1. If there is a problem with the web server’s use of the certificate.
2. Your connection has probably been intercepted, or the web server is misrepresenting the certificate’s identity.
How to Fix Wi-Fi Certificate Error on Windows 10?
Wi-Fi certificate errors are not new to the browser problems that we usually face. Therefore, along with the reasons stated above, we have described a set of five solutions to fix your issue of Wi-Fi certificate error in Windows 10.
Solution 1: Update Network Drivers
To update Network drivers in Windows 10, follow the steps given below:
1. Firstly, open Device Manager from the Windows Start menu.
2. Now, choose Network drivers from the list and then right-click it.
3. Next, click the Search automatically button to find the updated driver software.
4. Finally, select Update Driver and wait till your driver updates.
Solution 2: Restore advanced network settings to defaults
To restore Advanced Network Settings to defaults, follow the subsequent steps:
1. Firstly, you need to open the Settings menu by clicking the cog icon in the Windows Start menu.
2. Next, click Network & Internet. Clicking it will open the Status page. However, if it does not open, click Status at the top of the menu in the left-hand panel.
3. Finally, move down on the right to see the Network reset option, which you need to click.
4. Lastly, click the Reset now button to make changes.
Solution 3: Set the windows time service
To set the Windows time service in your Windows 10 PC, follow the steps mentioned below:
1. Firstly, open the Control Panel from the Windows Start menu.
2. Now, click on Clock, Language, and Region and select the Date and Time option.
3. Next, tap the Internet Time tab and click the Change settings button.
4. Now, check whether the Synchronize with an internet time server option is enabled or not.
5. Now, make use of the drop-down menu to select another server.
6. Next, click the Update now button to adjust the time with the new server.
7. Finally, tap the Apply button and then click OK.
Solution 4: Check Time and Time zone
Follow the given steps to check the time and time zone in your Windows 10 PC:
1. Firstly, go to the Windows Start menu and open Settings.
2. In the Settings menu, open Time & language and then go to the Date & time option. Here, you will be able to see the Time and Time zone of your PC.
Solution 5: Enable Hyper-V
To enable Hyper-V in Windows 10, follow the steps mentioned below:
1. Firstly, you need to right-click the Windows button and select the Apps and Features option.
2. Next, choose the Programs and Features menu under related settings on the right.
3. Now, select Turn Windows Features on or off.
4. Tap on Hyper-V and then click OK.
5. After the installation is completed, you will be prompted to restart your computer.
Frequently Asked Question
Q1. How to renew a Wi-Fi certificate in Windows 10?
Answer: To renew a Wi-Fi certificate in Windows 10, you need to follow the steps described below:
1. The first step is to click the Wi-Fi icon in the lower right corner of your screen and then select the “Open Network and Sharing Center” option.
2. Next, click “Manage wireless networks” on the top left, right-click the “rpi_wpa2” network, and then highlight it.
3. Next, click Yes in the dialog box to confirm removing the Network Network.
4. Click the Add button in the original Manage Wireless Networks window and select the option to “Manually create a network profile.”
5. Further, in the dialog box, type “rpi_wpa2” for the Network name and Security Type, enable the selection to select “WPA2-Enterprise,” and then click the Next button.
6. Now, click the “Change connection settings” option, and then in the new window, select the “Security” tab.
7. You now need to click on the Settings button next to Microsoft: Protected and then uncheck the “Validate server certificate” option at the top of this window.
8. Now, you need to click the Configure button and then, in the pop-up, uncheck the box and click OK.
9. You can now close the remaining windows by clicking OK and then the Close button.
10. Lastly, click the Wi-Fi icon in the lower right corner and select “rpi_wpa2”. Firstly, disconnect it and then connect it again.
11. Finally, enter the necessary credentials. Enter them twice if needed
Q2. Where to find a Wi-Fi certificate?
Answer: Follow the steps given below to find and download your Wi-Fi certificate:
1. Firstly, tap on VPN and apps or Wi-Fi.
2. Now, enter a name for the certificate and then click OK.
3. Next, go to Settings in the Start menu and select Wi-Fi.
4. In the Wi-Fi menu, click the Advanced button and then tap on Install certificates to install the Wi-Fi access certificate.
Q3. Why am I getting a certificate error?
Answer: This error is faced when the security certificate of the website is a deceitful one. It is also possible that the website’s address doesn’t match the address in the security certificate.
Q4. How do I clear the Chrome security certificate error?
Answer: To remove the Chrome security certificate error, follow the steps mentioned below:
1. You first need to press the Win+R combination keys.
2. Next, enter the following command- “C:\Program Files (x86)\Google\Chrome\Application\chrome.exe” –ignore-certificate-errors.
3. Finally, press the Enter button.
Q5. Why am I getting your connection is not private?
Answer: This happens when your browser cannot identify the authenticity and safety of the site you want to access.
We hope that this editorial was able to solve your problem of Wi-Fi certificate error in Windows 10. Nonetheless, if you are still not able to solve the problem, then you can connect with us via the chat box at the bottom right or through the comment section below. We’ll try to help you solve the issue.